Instruction for Use

EN
7
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this
value will then be shown on the display.
Wash cycles and options
Table of wash cycles
For all Test Institutes:
1) Test wash cycle in compliance with regulation EN 60456: set wash cycle
with a temperature of 60°C.
2) Long wash cycle for cottons: set wash cycle
with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle
with a temperature of 40°C.
Wash options
Steam Hygiene
This option enhances washing performance by
generating steam during the wash cycle that eliminates
any bacteria from fibres while treating them at the same
time. Place the laundry in the drum, choose a
compatible programme and select option "
".
 The steam generated during washing machine
operation may cause the porthole door to become hazy.
 It cannot be used in conjunction with
, (90°C), ,
, , , , , , , , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine
drum will rotate slowly; the Easy Iron and START/
PAUSE indicator lights will flash. To end the cycle press
the START/PAUSE button or the Easy Iron button.
For the Silk
wash cycle, the machine will end the
cycle while the laundry is soaking and the Easy
Iron indicator light will flash. To drain the water so that
the laundry may be removed, press the START/PAUSE
button or the Easy Iron button.
 It cannot be used in conjunction with
, , , , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by 30%-50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
 It cannot be used in conjunction with
, , , ,
, , , , , .
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is
used with a full load of washing, or when a large amount
of detergent is required.
 It cannot be used in conjunction with
, , , .
Wight sensor
When the machine is switched on and being loaded with
laundry, the load percentage, in relation to the selected
wash cycle, will appear on the display. Press the
button if you want the machine to display the
recommended amount and type of detergent (liquid or
powder) for every load level (the amount recommended
by the detergent manufacturer is used as a point of
reference). If the machine is overloaded, the "Over
loaded" error message will appear on the display and
the
symbol will flash. In this case, it is advisable to
reduce the load to ensure optimal washing quality.
Icon Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max.
load
(kg)
Cycle
duration
Detergent
for prewash
Detergent
for wash
Fabric
softener
Cottons wash cycles
Cotton
with pre-wash
(Add detergent to the relevant compartment).
90° 1200
lll
9
Cotton (1):
heavily soiled whites and resistant colours.
60°
(Max. 90°)
1200 -
ll
9
Cotton (2):
heavily soiled whites and delicate colours.
40° 1200 -
ll
9
Coloured
Cotton (3)
40° 1200 -
ll
9
Shirts
40° 600 -
ll
2
Jeans
40° 800 -
ll
4
Special programmes
Baby:
heavily soiled delicate colours
40° 800 -
ll
2
Durable
Synthetics
60° 800 -
ll
4
* Steam Refresh (see next page).
- - - - - 1,5
"Bed & Bath"
for bedlinen and towels.
60° 1200 -
ll
9
Duvets:
for down-stuffed garments.
30° 1000 -
ll
3,5
Silk:
for garments in silk and viscose, lingerie.
30° 0 -
ll
2
Wool:
for wool, cashmere, etc.
40° 600 -
ll
2
Mix 30':
to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand)
30° 800 -
ll
3,5
Partials wash cycles
Rinse - 1200 - -
l
9
Spin - 1200 - - - 9
Drain - 0 - - - 9
(*) The duration of the wash cycles can be checked
on the display.