Setup and user guide

6
CLEANING
Make sure that the appliance has cooled down before
carrying out any maintenance or cleaning.
Never use steam clening equipment.
Do not use wire wool, abrasive scourers or abrasive/
corrosive cleaning agents, as these could damage the
surfaces of the appliance.
INTERIOR AND EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Clean the glass in the door with a suitable liquid
detergent.
• At regular intervals, or in case of spills, remove the
turntable and its support to clean the bottom of the
oven, removing all food residue.
• The grill does not need to be cleaned as the intense
heat burns away any dirt. Use this function on a regular
basis.
ACCESSORIES
All accessories are dishwasher safe with the exception
of the Crisp plate.
The Crisp plate should be cleaned using water and a
mild detergent. For stubborn dirt, rub gently with a
cloth. Always leave the Crisp plate to cool down before
cleaning.
TROUBLESHOOTING
Problem Possible cause Solution
The oven is not working.
Power cut.
Disconnection from the mains.
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
The oven makes noises, even when it is
switched off.
Cooling fan active.
Open the door or hold or wait until the cooling process has
finished.
The display shows the letter “F” followed
by a number.
Software fault.
Contact you nearest Client After-sales Service Centre and
state the number following the letter “F”.
PRODUCT FICHE
WWW
The product fiche with energy data of this
appliance can be downloaded from Whirlpool website
docs . whirlpool . eu
HOW TO OBTAIN THE USE AND CARE GUIDE
>
WWW
Download the Use and Care Guide
from our website docs . whirlpool . eu (you can
use this QR Code), specifying the product’s
commercial code.
> Alternatively, contact our Client After-sales Service.
CONTACTING OUR AFTER-SALES SERVICE
You can find our contact
details in the warranty
manual. When contacting
our Client After-sales
Service, please state the
codes provided on your
product's identification
plate.
XXX/XXX
XXXXXXXXXXXX
XXXXXXXXXXXX
400011292975
Printed in Italy