Instruction for Use

EN9
ACCESSORIES NOT SUPPLIED
Other accessories can be purchased separately from the After-sales Service.
INSERTING WIRE SHELVES AND OTHER ACCESSORIES IN THE OVEN
WIRE SHELVES AND OTHER ACCESSORIES:
The wire shelf and other accessories are provided with a locking mechanism to prevent their accidental
removal.
1. Insert the wire shelf horizontally, with the raised part “A” upwards (Fig. 1).
2. Angle the wire shelf when it reaches the locking position “B” (Fig. 2).
3. Return the wire shelf to the horizontal position and push it in fully to “C” (Fig. 3).
4. To remove the wire shelf proceed in reverse order.
The other accessories, like the drip tray and baking tray, are inserted in exactly the same way.
The protrusion on the flat surface enables the accessories to lock in place.
INDUCTION PLATE:
The Induction plate must be inserted at the third shelf position to allow the electrical plug to engage.
1. Use both hands to properly place the induction plate on the third shelf position (Fig. 1).
2. Use both hands to push the induction plate up to the electrical plug (Fig. 2).
3. Ensure the plug is fully engaged by firmly pushing the induction tray (Fig. 3).
COOKING VESSEL:
Place the cooking vessel on the induction plate, ensuring that the bottom of the vessel lays within the
rectangular markings on induction plate glass.
1. Use both hands to place the cooking vessel on the induction plate (Fig. 4).
2. Place the cooking vessel at the centre of the markings on the glass (Fig. 5).
Fig. 1
Fig. 2 Fig. 3
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5