Operation Manual

EN 12
5 SETTING DURATION
To set the duration of a function after setting the
temperature.
Icon ashes.
Press or to run an untimed cooking cycle
(5.1).
Turn
to set duration.
Press to conrm timed cooking time (5.2) and
go to setting the end time or press to Quick
start.
NOTE: press
to adjust the duration during a
cooking cycle.
5.1 UNTIMED COOKING CYCLE
During an untimed cooking cycle the right display
shows the duration counting up minute by minute
and “:” ashes.
Press to end the cooking cycle at any time
and switch the oven OFF.
NOTE: press
to switch from untimed to timed
cycle and set an end time.
5.2 TIMED COOKING CYCLE
During a timed cooking cycle, the right display
shows the duration counting down minute by
minute and “:” ashes.
Press to end the cooking cycle at any time.
Once the cooking time has elapsed, the right
display shows “End” and a buzzer sounds.
NOTE: the duration does not include the time for the
preheat phase.
6 SETTING CYCLE END TIME
WITH DELAYED START
To set the desired end time of a function.
The right display shows the time of cooking cycle
end and the
icon ashes.
Turn to set desired end time.
Press
to conrm end time.
NOTE: the time indicated on the display includes the
duration set. During delay it is always possible to:
Turn
to extend the end time.
Press
to adjust the temperature level.
Press
to adjust the duration.
If the function provides a pre-heat phase, it will be
skipped when a delay time has been set.
USING THE OVEN