Operation Manual

3
ELECTRICAL CONNECTION
BEFORE USING THE OVEN

For best use of the oven please read the
instructions for use carefully and keep
them in a safe place.

Remove the cardboard protection and the
protective plastic film.

Take the accessories out of the oven and
heat it to 200°C for about an hour to
remove the smells and fumes of insulating
material and protective greases. Keep the
window open during this operation.
HINTS FOR PROTECTING THE ENVIRONMENT
1. Packing

The packaging material is 100% recyclable
and it is marked with the recycle symbol
().
2. Electrical appliances

The electrical appliances are manufactured
with recyclable or reusable material.
Dispose of them following the local
regulations for the disposal of waste.
Before disposing of them make them
unusable by cutting off the supply cable.

Do not switch on the oven before connection is
complete.

Make sure that the installation and the electrical
connection are made by a qualified engineer
according to the manufacturer's instructions and the
local rules in force.

The installer is responsible for the correct electrical
connection and for observance of the safety rules.

The appliance must be connected to the main outlet
by means of an omnipolar switching device with a
contact opening distance of at least 3 mm.

Grounding appliances is mandatory by law.

Do not use multiple sockets or extensions.

After the installation, the electrical parts must be
inaccessible.

Make sure that the voltage stated on the appliance
rating plate is the same as the voltage in your home.

The rating plate is on the front edge of the oven
(visible when the door is open).
3gb66016.fm5 Page 3 Tuesday, April 16, 2002 3:27 PM