Operation Manual

10
•
To make the most of your new appliances read the
users instructions carefully and keep them on
hand for consultation in the future.
Cooktop
• The cooktop must be set into a worktop
between 20 mm and 50 mm thick.
• The distance between the lower face of the
glass ceramic hob and the cupboard or
separating panel must be at least of 90 mm.
• If the cooktop is to be installed next to a
column unit, leave a distance of at least 100
mm from the edge of the cooktop to the side of
the column unit.
•
Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
•
If not already present, fit the supplied seal to the
cooktop flange after cleaning the contact area as
shown in the figure.
N.B.:
Remove the protective film before installing the
cooktop.
• If the worktop is made of wood,
use the supplied
spring clips and screws.
1.
Position the 4 clips (
D
) as shown and at the
specified dimensions.
2.
Secure the clips using screws (
E
).
3.
Fit the cooktop into the worktop.
• If the worktop is made of marble, plastic,
ceramics, natural stone, etc.
, the cooktop must
be secured with brackets (
F
) code 4819 404 78697
(to be requested from After-Sales Service).
1.
Fit the cooktop into the worktop.
2.
Position the 4 brackets (
F
) as shown in the figure,
in accordance with the thickness of the worktop.
3.
Fix the 4 screws (
G
) in holes (
H
).
BEFORE USING THE GLASS CERAMIC HOB
INSTALLATION
58911Agb.fm5 Page 10 Thursday, February 8, 2001 11:44 AM