Operation Manual

15
HOW TO FILL THE RINSE AID DISPENSER
The rinse aid facilitates drying and prevents the formation of
unsightly spots and streaks on crockery. Before using the dishwasher
for the first time, fill the rinse aid dispenser. Only use rinse aids
recommended for use in domestic dishwashers.
1.
Unscrew the cap by turning it counter-clockwise.
2.
Completely fill the dispenser with rinse aid.
Immediately wipe away any rinse aid spilt accidentally!
This
prevents the formation of excess suds which may spoil washing
results.
3.
Screw the cap back on by turning it clockwise.
Thereafter, regularly check the rinse aid level.
How to adjust the rinse aid dosage regulator:
Factory setting: position 3.
If you are not satisfied with washing or drying results, change the
rinse aid dosage setting.
1.
Unscrew the cap by turning it counterclockwise.
2.
If crockery is prone to whitish streaks: reduce the dosage by
turning the dial to a lower setting (1-3) using a coin or the like.
If crockery is not perfectly dry: increase the dosage by turning the
dial to a higher setting (5-6).
3.
Screw the cap back on by turning it clockwise.
Rinse aid level indicator:
Visual indicator:
light
add rinse aid
dark
sufficient rinse aid.
Do not add any!
Electric indicator (if provided):
The indicator lamp on the control panel lights up when more rinse aid
needs to be added.
3gb94300.fm Page 15 Thursday, April 4, 2002 3:54 PM
Black process 45.0° 100.0 LPI