Air Conditioner User Manual

seal strip

Slldlng

sash

sod

strip

. sesl

strip

Slldlng sash

Thck

(room side)

11. Peel backing from seal strip (Item 8) and

press it onto side filler frame guides on each side

of unit.

12. Place unit in window by testing unit on

shelf. Push unit toward window so side angles are

sealing against the side jamb stop (see diagram).

Slide the opened window sash firmly to make cer-

tain the frame and unit sealing strips are sealing.

13. Using %I” drill, install locking screws

(Item 7). Use two screws in top jamb and in the

side bottom flanges. If you need additional holding

strength, add two more screws at upper sides of

filler frame (marked “A’). Also, two screws can be

added at unit sides (marked “6”). However, if you

add screws at “6,” you must use a %I$ drill bit to

predrill through the plastic sides of air conditioner.

14. Lock the sliding sash at bottom using lock

bracket (Item 10) and screw (Item 7) as shown in

diagram at left. Use a W’ drill bit to drill through

track before inserting screw.

15. Cut seal strip (Item 11) to length. Install it

between space of opened sash and glass of the

closed sash (see diagram).