Air Conditioner User Manual

Inst8lktlon In-s

Continued

Y4”

Max.

-I I_

Back of air

condltlonor

5. Check the knurled knob screws to see that

the top mounting brackets (Item 5) are Mracted to

the center of the unit. They must not interfere witft

the window frame when the unit is installed.

6. Lift the unit into the window opening and

slide it back until the mounting frame comes into

contact with the window frame.

7. Replace the bottom mounting brackets

(Item 3) by hooking the bracket over the window

frame. Replace the top screws (Item 1) in the

mounting bracket, leaving them loose enough so

them is about %s” of play Tighten the bottom

screws (Item 2). This will pull the unit mounting

flange tightly to the window frame, sealing and

locking the air conditioner in place.

8. Loosen the two knurled knob screws and

slide the top mounting bracket (Item 5) toward the

outside of the unit, engaging the window frame.

Tighten the knurled knob screw in this position.

This will lock the unit in place so it cannot tftt into

the room. The Installation Is now complete.

9. Optional mounting instructions. If the win-

dow thickness will not allow you to use the four

mounting brackets provided with the unit, remove

brackets and fasten flanges of unit with sheet

metal screws. These screws are not included with

your air conditioner. The window opening for your

installation must not be wider than 151

shestlnsw

SWOWS-