Specifications

Tony International (HK) Co.,Ltd
http://tonyhk.hk/http://tony0769.com Page 2 of 60 complete solution of laboratory
Item 2.
TW-200B EN71 Drop Test Plate (drop test)
Simulate the real floor, to test the toys fall on the floor of the toys produced after the
destruction and damage caused by the impact of whether the product meet the requirements
dropped
Specification：2mm Rubber+4mm SST Sheet 600mm×600mm
Hardnes: Shore 75±5
Standards: EN71-2011 8.5 drop test
Estimate the groups of ages applied to the toys tested according to the table
below
standard
requir
ement
s
title
Age group weight of toys drop height times drop surface
0-18 months Less than 3 土
0.01LB
54.5 土 0.5
inches
10
times
18-36 months Less than 4 土
0.01LB
36.5 土 0.5
inches
4 times
CPSC／
ASTM
F963—96a
36-96 months Less than 10 土
0.01L．
36.5 土 0.5
inches
4 times
ASTM／CPSC
floor
EN71 0-14 years old No limit 850 土 50mm 5 times EN71 floor
The Safety Requirements of Toys Drop Test in Some International Districts
requirements
standard
age weight of toys drop
height
times drop surface
Australia
AS 1647
0-18 months
18 -168
months
specification 59 inches
39.5 inches
10 times
4 times
CPSC／
ASTM
floor
England BS 5665
France NF 51-202
According to the standard of EN71
Standard in
Canada
≤3 years old
>3 years old
specification 4.5 inches
3 inches
4 times
4 times
CPSC／
ASTM
floor
Standard in Japan No age section specification 85 土 5cm 5 times OPSC／
ASTM