东 尼 国 际 (香 港) 有 限 公 司 T o n y I n t e r n a t i o n a l (H K) C O., L T D 东 莞 市 华 科 东 尼 仪 器 有 限 公 司 Add: No.1 Tech Road, High & New Tech Development Zone, Songshan Lake, Dongguan City. Tell: 0769-23010657/ 89770663 Fax: 0769-23010667 Email:lewis.huang@tonyhk.hk Toys Testing Machines for ISO8124/EN71/ASTM F963 Mechanical and physical properties Item 1.
Tony International (HK) Co.,Ltd Item 2. TW-200B EN71 Drop Test Plate (drop test) Simulate the real floor, to test the toys fall on the floor of the toys produced after the destruction and damage caused by the impact of whether the product meet the requirements dropped Specification：2mm Rubber+4mm SST Sheet 600mm×600mm Hardnes: Shore 75±5 Standards: EN71-2011 8.
Tony International (HK) Co.,Ltd floor Item 3. TW-201 Impact Tester (impact test) Reduce the material damage or the danger of imitation toys protection devices as the real face. Range: imitation protect device ( clear material protector, headpiece,cap,blinker) Standards: EN 71-2011 8.7 impact test. specifications: 1. dimension: 300(l)x300(w)x16(h)mm 2. adjust height: 0-200mm 3. impact hammer diameter: 80.00mm 4. impact hammer weight: 1Kg (hammer and rod) 5.
Tony International (HK) Co.,Ltd standard: 16 CFR 1510; ASTM F 963 4.21; EN71-2011 8.16 Geometric shape of certain toys; GB6675-2003 A.5.3 made of Aluminium material http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Item 5. TW-204 Accessibility Probes AB To determine whether any part or component of a toy can be contacted by the probe. The probe simulates the finger of the infant or child touching the accessible points or edges of a toy, which may then be subject to tests of sharp points or sharp edges. Accessibility probes are designed for two age groups: Probe A for 0-36 months Probe B for 37-96 months Standard: ISO8124--1: 5.7 accessibility of a part or component, EN71-1 2011 8.
Tony International (HK) Co.,Ltd Item 6. TTW-205 Test Fixture for Small Ball Small ball test fixture is use to examine a toy up of whether small ball accessories may result in the child swallow, stop breath way and esophagus to cause choking danger or not. Standards:16CFR 1510 / ASTM F 963 4.6.2 /EN71-1 2011 8.32.1/ISO 8124-1 5.4 small balls and suction cups GB6675-2003 A.5.3 made of Aluminium material http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Item 7. TW-206 Small Parts Cylinder To determine whether toys & other articles intended for use by children under 3 years old present choking, aspiration, or ingestion hazards because of small parts. If any objects can fit completely into the cylinder without compressing & in any orientation, it is defined as a "Small Part". Its internal dimensions simulate the fully expanded throat of a child under 3 years old. Standards: 16 CFR 1500.48, ASTM F963 4.8, EN-71-1 2011 8.
Tony International (HK) Co.,Ltd Item 8. TW-207 Bite Test Clamp Simulates a child biting the accessible area of toys. The part of the toy being tested is placed in a bite test clamp & a specified force is applied for a specified period. The toy is then tested to ascertain whether or not any hazards result from the bite test such as sharp points/ sharp edges / small parts. Dimensions:95*45*45mm Weight:760g Standard: ASTM F963, 16CFR 1500.52C, ISO8124-1 4.
Tony International (HK) Co.,Ltd Item 10. TW-219 Projectile Velocity Tester To determine the size catapults kinetic energy of toys, the ejection of parts of the test apparatus through the tube or external testing of the components of the two sensors detect the ejection toy parts used away after a certain period of time, it has calculated the move Energy. The main instruments used for this test launch of baby toys or children's safety. Clock out: 1 MHz Display: 7 digit Display rang : 0.000001 to 9.
Tony International (HK) Co.,Ltd Dimensions: 260*120*180mm(L*W*H) Weight: 1.99 kg Standard: ISO 8124-1 4.6,5.8 sharp-edge test,, EN71-1 2011 8.11 Sharpness of edges Accessories: charging unit 1 pcs foot switch 1 pcs base plate 1 pcs Standard import sharp edge tape 1 roll PTFE http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Item 12. TW-221 Sharp Point Tester The Sharp Point Tester is used to examine a toy of position whether the existence endanger safe of sharp-edged sharp point. Belongs to the test item of the toy safety; All accessorieses is made of nonrust material . The technical parameters requirement of all countries is consistent. Dimensions: 112x 16x16mm Weight: 1 pound Standards: 16 CFR 1500.48, ASTM F963 4.8, EN-71 2011 8.14, ISO 8124-1 5.
Tony International (HK) Co.,Ltd which contains soda and lime ingredients under the result of melting. Item 13. TW-224 Nail Bed Flammable Tester Nail Bed Flammable Tester.Used in the detection part of the combustion of flammable hair, and record the time, to see whether the burning of part of the meet flammability standards Dimension: 25.4*25.4cm Standard: ASTM F963, ISO 8124-2 Item 14. TW-225 Surface Flammability Tester I.
Tony International (HK) Co.,Ltd 一﹑physical construction: 1. physical construction: (figure 1) 11 10 1 2 3 12 4 13 5 6 0 7 14 8 1. 2. function description: 9 Figure 1 1.fixture board 2.burner 3.angle handle 4.control panel 5.flame adjustment knob 6.left shift buton 7.automatic button 8.right shift button 9.power switch 10.upper fixture 11.lower fixture 12.top plate 13.gas enter 14.base fixtrue board and the fixtures: sample holder,easy and fast to clampl the test sample.
Tony International (HK) Co.,Ltd burner stroke ≥300mm fabric plush altitude 70mm Space between two fixtures 100mm sample dimension length 200mm,width≥130mm, sample amount for test 2 pcs space between burner and sample 5mm surface space beteen burner center to 15mm lower fixture burning gases butane gas size(WxDxH) 60x41x32cm weight(Kg) power ≈20Kg 1∮ AC 220V 5A Table 1 Item 15.
Tony International (HK) Co.,Ltd This tester was designed according to EN71-2008 standard, both sell to overseas and dometic market. (1） Adopt the mininsize gas cylinder system, the instrument can be moved, take up small space. The user also can connect big gas cylinder. (2) The gas system is controlled by PLC, ignite and continue burning time are accuracy, (3) All frames can be adjusted to meet different testing need.
Tony International (HK) Co.,Ltd Construction I G E D C B A H F A: Baseplate used for collecting the toy combustion residue, facilitates clean. After using in collects the toy combustion residue, facilitates cleanly B: Control panel C: butane cylinder D: burn head E: ignition mouth (applies to ISO 6941 standard) F: Burner G: 45degree U type test clamp H: The first , second mark thred hammer and min switch I: Head fix frame Spare Parts for the EN71 Toys Flammability Testing http://tonyhk.
Tony International (HK) Co.,Ltd Cotton thread for Mark Gas Device 45 Degree U Frame Supporter Hammer Flame Meter Flame Supporter Gas and Flame Lighte (but could not be sent as the forbidden goods) http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Item 16. TW-227 45 degree Flammability Tester Brushing device 45 degree flammability tester, check the flammable performance of the textile Stainess testing room with glass window,after ignition automatic time (0.01 second precision) automatic or parameters： Manual firing device, including sample holder and brushing device. Spread time scope: 0-99.99s Firing time: 1s or specified Resolution: 0.
Tony International (HK) Co.,Ltd AUTO：automatic button，can switch manual status back to automatic status. Press SETUP button, Ts showed a flashing indication on the left, through the UP, DOWN keys to change the value, press the SETUP key to exit the setting mode. Item 17. TW-228 Toy Box Cover Durability Tester The machine applies to test the durability of toys lid switch that can be repeated.
Tony International (HK) Co.,Ltd Weight 约 30kg Power 1∮ AC 220V 3A Box cover durability tester. Control mode: Controlled by Micro-computer automatically Action mode: Electromotion or Automatism Test pieces: Stop automatically Standards: 16 CFR 1500, ASTM F963 4.8, EN-71, ISO 8124 -1 5.13 Item 18. TW-229 Mouth Toy Endure Tester (Gas operated type) To prevent mouth moving toys or children's mouthpiece has been mistakenly inhaled and cause a choking hazard Features: 1.
Tony International (HK) Co.,Ltd Item 19. TW-229 Mouth Toy Endure Tester (electrodynamic type) To prevent mouth moving toys or children's mouthpiece has been mistakenly inhaled and cause a choking hazard Features: 1. Instruments to meet the 5s at least 295 cubic centimeters within + / -10 cubic centimeters of gas, and can be 10 times alternately blowing, suction toy. 2.This instrument is electrodynamic type, has air source inside, no need additional air compressor.
Tony International (HK) Co.,Ltd Energy along the X, Y, Z (X displacement:0-1000MM; Y displacement of 0-1700MM; Z displacement: 0-1800MM) slide freely positioning the three directions. Flat with horizontal and vertical angle adjustment instructions: 0-1800; Optical ranging device, measurement noise, the distance between the meter and toys; Dimension (L * W * H): about 1880 * 1150 * 2200mm Material: Aluminum Item 21.
Tony International (HK) Co.,Ltd Item 23. TW-260 Sound Level Meter The Sound Level Meter has been designed to meet the measurement requirements for industrial safety offices and sound quality control in various environments. Test range: 30 to 130 dB Dynamic Range: 60dB Resolution: 0.1dB A and C frequency weighting Maximum and minimum volume includes occurs time Fast time , slow time weighted.record and read the manual volume Standards: IEC61672-1 : 2002 Class 2 .ISO8124-1 4.
Tony International (HK) Co.,Ltd C HI (High) - Weighting: 65-130dB Resolution: 0.1dB Frequency Range: 31.5Hz to 8KHz Accuracy:±2dB Dynamic Range:65dB Frequency Weighting: A、C Time Weighting: Slow & Fast Maximum Hold: Decay < 1dB/3min Microphone: Electret condenser microphone Calibration: Electrical calibration by using the internal oscillator (1KHz sine Wave at 94dB) Auxilitary Output: AC conditioned, 0.
Tony International (HK) Co.,Ltd oblique plane size:W*L1000*3000mm Use the toys can be loaded one child weight. Loading on the toys,which is worst standing position or seating position, Children below 36months（including）Loading 25㎏±0.2㎏, Children above 36months,loading 50㎏±0.2㎏ Loading on the toys,put the toys on the 10±1degree Inclined plane If the toys can be loaded one child weight.
Tony International (HK) Co.,Ltd Item 26. TW-269 25kg /50kg Dynamic Strength Weight specification part weight(Kg) diameter(mm) height(mm) a 10.42 150±2 75±2 b 14.58 178±2 75±2 c 4.16 d 2.00 e 0.50 Standard: EN71-1 2011 8.22.2, ISO8124-1 5.27 http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Item 27. TW-232 Flat Claw Clamp Used for assisting pull testing,made of stainless steel Dimension: 167*60*13MM Standards: ISO 8124-1 5.24.6.1 tension test Item 28. TW-233Hair Claw Clamp Used for assisting hair tension testing Dimension: 116*82*16MM Material: stainless steel fixture, rubber grip Standards: ISO 8124-1 5.24.6.1 tension test Item 29.
Tony International (HK) Co.,Ltd Item 30. TW-236 Big Mouth Clamp used for assisting pull testing , made from adaption of USA VISE-GRIP 5WR; 7CR; 10CR redo Dimension: 190*49*14MM Material: stainless steel Standards: ISO 8124-1 5.24.6.1 tension test Item 31. TW-237 Pull Hook Used for wheel pull testing fixture, made from stainless steel Dimension: 210*31*25MM Material: stainless steel Standards: ISO 8124-1 5.24.6.1 tension test Item 32.
Tony International (HK) Co.,Ltd Item 33. TW-239 Two Claw Clamp Stainess steel, used for testing eyes, nose etc.... Dimension:105*30*25MM Standards: ISO 8124-1 5.24.6.1 tension test Item 34. TW-240 Three Claw Clamp Stainess steel, used for testing eyes, nose etc.... Dimension: 105*37*26MM Standards: ISO 8124-1 5.24.6.1 tension test Item 35. TW-241 Seam Clamp For assisting suture pull testing used.
Tony International (HK) Co.,Ltd Item 36. TW-243A Torque Clamp (big size) Used for clamping the sample during the wrest testing Stainless steel and aluminum, and copper Single screw type,big size Standard: ISO8124-1 5.24.5 torque test Item 37. TW-247 ASTM/EN Flexure Test Fixture Used to test the toys from the increase in rigidity or fixed shape of the metal wire or other metal materials used in the bending (or abuse) the process, whether due to fracture a risk of a sharp tip or sharp edges protruding.
Tony International (HK) Co.,Ltd Item 38. TW-250 Infrared Thermometer Features: a) simple one-hand operation; b) laser targeting; c) LCD with back light; d) C/F select switch; e) laser on/off switch; f) automatic power off; g) display hold function Standard: ISO8124-1 4.23: 5.18 Item 39. TW-257 2m/s Tester This instrument is mainly used for test rides at the speed of toys 2m / s when the value of the barrier imposed by force.
Tony International (HK) Co.,Ltd Item 40. TW-257 2m/s Tester Dynamic strength tester is mainly used for testing function of the kids riding tricycle after hitting the 50x50mm barrier at the speed of 2m / s Purpose This instrument imitates the state of children riding tricycle, put certain load on the sample, make it hit the 50x50mm barrier at the speed of 2m/s, then check if the sample structure and properties is good. Standards: This instrument manufactures refer to EN 71 section 8.
Tony International (HK) Co.,Ltd · Overload alarm, display flashes at overload limit · Low battery icon · Selectable real time or peak mode operation · Push-button tare function · Reversible display · Set of six adapters, AC charger/adapter and carrying case DS2 digital force gauges feature a large, easy-to-read LCD display and simple push-button operation. An ergonomic metal housing protects the highly accurate loadcell and electronics in tough industrial environments. · Accuracy: 0.2% F.S.
Tony International (HK) Co.,Ltd Item 43. TL-412 Imada Push&pull Scale The rugged construction of the FB/PS force gauges will withstand industrial environments and yet retain calibration for extended periods. Ergonomic design makes it ideal for hand held use, or it can be mounted to a test stand. The Zero-Tare ring allows you to zero the gauge to compensate for measuring attachments and changes in measuring position. The real time/peak hold selector switch allows you to observe transients or capture peaks.
Tony International (HK) Co.,Ltd Item 44. TL-404 TTF Push Pull Tension Tester It is used for providing large and steady strength during the tension testing Most use in toy ‘s damage tension testing, provide the strength by air cylinder Push-pull intensity maximum: 188/168kgf Cylinder trip maximum: 125mm Adjustable speed: 50-800mm/s Cylinder base plate trip: 0-500mm Withstanding pressure cylinder: 13.
Tony International (HK) Co.,Ltd Selected and certified for AATCC Test methods requiring repeated home laundering (methods 88 B+C, 124, 130, 135, 142, 143, 150, 172 and 179). Available in US domestic and international electrical specifications. Application:To determine the dimensional stability (shrinkage or growth) of woven or knit textile fabrics and garments that take place when fabric are subjected to the conditions of consumer laundering.
Tony International (HK) Co.,Ltd AATCC 1993 STD WOB Detergent (Without Optical Brightener),24 LB/Tub Standard: AATCC 61 AATCC Detergent (with brightener) AATCC 1993 STD REF Detergent,drum of 24LB Standard: AATCC 135&150 Item 46. TNJ-042 AATCC Dryer Machine(whirlpool) Selected and certified for AATCC Test methods requiring repeated home laundering (methods AATCC 88 B+C, 124, 130, 135, 142, 143, 150, 172, and 179).
Tony International (HK) Co.,Ltd Drying capacity: 18 pound/8.2kg Place of original: USA Weight: 60kg(130LB) Power: 220V/50Hz/30AN WEIGHT：60 kg 130 lb Item 47. ISO Standard Precision Tumble Dryer Standardised tumble drier.
Tony International (HK) Co.,Ltd Item 48. TW-258 SAFQ Button Pull Test Machine The button snap tester.To determine the holding or breaking strength of prong-ring attached snap fasteners onto garments. Consists of an Upper Snap Clamp, a Lower Fabric Clamp & Force Gauge mounted on a Stand. The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp.
Tony International (HK) Co.,Ltd Standard Accessories: Upper Universal Clamp 1pcs Test for female part of snap and male part of stud. Uper Stud Clamp 1pcs Test for male part of baby snaps but generally Upper Three Pronged Clamp 1pcs Test for four-hole buttons and Jeans buttons. Two Pronged Clamp 1pcs Upper Grasp Button Clamp 1pcs Designed to gripping the grasp buttons or larger buttons, e.g. Jeans or Plastic Button up to 30 ligne.
Tony International (HK) Co.,Ltd Upper Long Nose Vise Clamp 1pcs Mainly used for trouser hooks and other smaller accessories. Seam Test Clamp For assisting suture pull testing used. Made from adaption of USA VISE-GRIP 6LN Specification: jaw diameter19 mm, round handle IMADA Push-pull Scale FB 100LB 1pcs Dislay the reading of pulling force with capacity up to 100LBS Calibration Weight 15 LB 1 pcs Routine checking the accuracy of the Imada Force Gauge. http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Item 49. SP752 UV-Vis Spectrophotometer (made in China) An UV-Vis spectrophotometer with power on self-testing, automatic wavelength calibration, light source auto-switching, PC controlled, etc. SP-752 UV-Vis spectrophotometer takes use of high precision sine mechanism as a wavelength driver.
Tony International (HK) Co.,Ltd Display system Light source 2*20 large screen LCD Import long-life tungsten lamp、deuterium lamp Detector Import Si Photodiode Overall dimension 475*420*180mm Power AC 220V/50Hz or 110V/60Hz Weight 11kg Standard Equipped Assessories: 1. manual Cuvettes Holder 10mm 1 pcs 2. 10ml standard glass cuvet 4 pcs 3. 10ml standard quartz cuvet 2 pcs 4. RS-232C line 1 pcs 5. Power line 1 pcs 6. Manual book 1 pcs 7. Win-Spec Software Win-sp5.0 Item 50.
Tony International (HK) Co.,Ltd B) Three options for spectral bandwidth selection: 5nm, 2nm and 1nm, made according to customer's need and satisfy the requirements of pharmacopoeia. C) Manual 4-cell holder accommodates width pathlength cells. D) Optimized optics and electronic system design with over 30-year experience, ensuring high performance and reliability. E) Rich measurement method adopted: Wavelength scan, time scan, multi-wavelength determination, etc., meet different measurement requirement.
Tony International (HK) Co.,Ltd Baseline flatness ±0.001 Abs (200 to 1100nm,one hour after light source turned ON) Noise level 0.002 Abs Dimensions (W×D×H) 550(W) x 470(D) x 200(H) Weight 17kg Printers DPU, ESC/P, PCL printers, USB I/F Windows-compliant printers are available with USB memory and PC software Memory USB memory (option) Saved as text and UVPC file Performance for PC USB memory + UVProbe (standard) Win Item 51.
Tony International (HK) Co.,Ltd Switch unit:Kgf,lbf,N Load solution: 1/10,000 Test speed: 30~500mm/min Displacement accuracy: 0.001mm Max stroke: 650mm/800mm/1000mm Power:220V.60Hz, 24Am Dimension: 500*460*1510mm Weight:80 KG Stroke Resolution: 0.1 mm Data sampling frequency: 16 times / sec Motor: servo motor (Taiwan) Item 52. TW-029 Dual Arm Computer Servo Tensile Strength Test Machine http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.
Tony International (HK) Co.,Ltd Force measurement accuracy: 0.5% Test stroke: 1000mm, effective test width: 400 mm, or specified per customer Test force loading the measuring range: 0.4% -100% FS Resolution: maximum test force of 1/200000 Test speed :0.01 - 500mm / min. or specified per customer. Displacement measurement accuracy: ± 0.5% of indication Test force control rate adjustment range: 0.05% -5% FS / S Control accuracy: ± 0.5% when the control rate ≥ 0.
Tony International (HK) Co.,Ltd V. Test Result VI. Report http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd User Settings http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Force-elong http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Multi-Graph http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Test Result http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Grips for Fabric and Leather(Grips could be made specified by customers) 1) Tensile strength ISO 13934-1 2) Tear strength ISO 13937-2 http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Resistance to seam slippage ISO 13936-2 http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Some of our strategic partners as follow： 1深圳SGS通标技术服务有限公司 Shenzheng SGS-CSTC Standards Technical Services Co., Ltd (Physics Lab) 2青岛SGS通标技术服务有限公司 Qingdao SGS-CSTC Standards Technical Services Co.
Tony International (HK) Co.,Ltd 21 重庆市合川计量质量检测中心 22 福建林业研究院 (物理实验室) Fujian Academy of Forestry Sciences 23新疆出入境检验检疫局 Xinjiang Entry-Exit Inspection and Quarantine Bureau 24敏华控股 Man Wah Holdings Limited 25东莞楷模家居用品有限公司 COOMO 26东莞佳居乐用品有限公司 Dongguan CACAR Kitchen 27深圳雅兰公司（国内卖场展示仪器）Shenzhen Airland Furniture Ltd. 28德国博克BOCK家具（中国、德国） (物理实验室) BOCK Gemany 29 Intertek 天祥中国 30 SGS Pakistan(Private ) Limited 31 PT SGS INDONESIA 32 TUV RHEINLAND VIETNAM CO,.
Tony International (HK) Co.,Ltd Company Profile Established in 2001 at New Territories of HK and having the sales department at Dongguan city in 2004. Tony International(HK) Co., LTD is specializes in testing and measurement industry for toys and textile field. Continue its advanced design technology and concept, excellent technology of producing and outstanding providing system of quality management; the enterprises and the quality inspection agencies with high class products.
Tony International (HK) Co.,Ltd http://tonyhk.hk/http://tony0769.
Tony International (HK) Co.,Ltd Show room: http://tonyhk.hk/http://tony0769.
