TM 502USB 802USB 1002FX / USB 1202FX / USB OPERATING MANUAL AND USER GUIDE www.wharfedalepro.
OPERATING MANUAL AND USER GUIDE TABLE OF CONTENTS IMPORTANT WARNINGS & SAFETY INSTRUCTIONS ....................................................2 INTRODUCTION ................................................................................................................4 ABOUT THE CONNECT MIXERS ......................................................................................4 FEATURES .....................................................................................................................
CONNECT SERIES IMPORTANT WARNINGS & SAFETY INSTRUCTIONS 1. Read these instructions. 2. Follow all instructions. 3. Keep these instructions. 4. Heed all warnings. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other instructions. apparatus (including amplifiers) that produce heat. 9.
OPERATING MANUAL AND USER GUIDE ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR 19. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. Warning: To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside.
CONNECT SERIES INTRODUCTION Congratulations on the purchase of your CONNECT series mixer. CONNECT series mixers are the result of many years of experience in the use, design and manufacture of professional audio equipment. We take great pride in engineering and building every Wharfedale Pro product and wish to thank you for entrusting us with your sound.
OPERATING MANUAL AND USER GUIDE CONNECT 502USB FEATURES • 1 Mono Mic/Line Channel and 2 Stereo Channels • 2 Band EQs for mono channel CONNECT 802USB FEATURES • 2 Mono Mic/Line Channels and 2 Stereo Channels • 3 Band EQs for all channels CONNECT 1002FX/USB FEATURES • 2 Mono Mic/Line Channels and 8 Stereo Line Channels • 3 Band EQs and switchable high pass filter for all mono channels • Built-in 56 effects digital FX with LED display • Control room, FX Send/AUX and Headphones outputs CONNECT 1202FX/USB FE
CONNECT SERIES USB INTERFACE The USB connector enables computers with USB connectivity to interface directly with the CONNECT mixer for full duplex recording and playback. In recent years the introduction of USB connectivity has ushered a new appreciation of the capabilities of computer audio, helping to fuse both digital and analogue and open up endless possibilities for the recording musician.
OPERATING MANUAL AND USER GUIDE FX Interface You have a choice of 56 different effects, from Reverb to Flanging to Delay. You can send them to the main mix outputs. 1 1. Shows the code of the selected effect 2 2. Shows when the FX bus is overloaded 3 3. Turns the FX processor on or off 4. Selects the effect algorithm as listed below the control 4 5.
CONNECT SERIES WALKTHOUGH—CONNECT 502USB Mic 1 502USB Line In 2/3 Line In 4/5 Main Out 1 Phones 2 L Line In (Mono) 3 Bal or Unbal Bal or Unbal R L (Mono) Bal or Unbal R L 18 Balanced 17 R 4 Gain 5 Balance Clip +50dB +30dB Mic:0 Line:-20 L R High Level 12KHz 6 - 16 +15 Power Low +48V 15 80Hz 7 - USB In 6 USB to Phones -20 EQ Balance L L R L 0 R USB to Main R 0 0 Level Level 9 14 0 Pan 8 Clip +15 13 - +15 - +15 1 - 4/5 10 11 Max Phones
OPERATING MANUAL AND USER GUIDE WALKTHOUGH—CONNECT 802USB 1 2 15 3 14 4 5 6 7 8 13 9 10 12 11 1. Balanced XLR input for microphone 2. Balanced/Unbalanced TRS input for line level sources (for the STEREO channel) 3. Balanced/Unbalanced TRS input for line level sources 4. Clip LED lit when the signal is overloaded 5. Gain control for calibrating sources and applying correct gain structure 6. High EQ centred at 12kHz 7. Mid EQ centred at 1kHz 8. Low EQ centred at 80Hz 9.
CONNECT SERIES WALKTHOUGH—CONNECT 1002FX/USB (also for 1202) 23 22 21 1 20 19 2 3 0 0 0 0 Logic TM 4 -15 +15 -15 +15 -15 +15 -15 0 5 -15 0 +15 0 0 USB In +15 USB to Phones 0 0 6 USB to Main -15 0 +15 0 0 0 7 18 8 0 0 0 0 9 10 11 12 13 14 15 16 17 1. Balanced XLR input for microphone 2. Balanced/Unbalanced TRS input for line level sources 3. Gain control for calibrating sources and applying correct gain structure 4. High EQ centred at 12kHz 5.
OPERATING MANUAL AND USER GUIDE WALKTHROUGH—REAR PANEL On Off On 1 Off AC17V 2x1000mA 35W Off Phantom +48V AC17V 2x1000mA 35W On P1 P2 3 AC Input Power P1-P2: 17V~ P3-P2: 17V~ 1. Turn the Connect Mixer on or off 2. AC power supply receptacle CAUTION: USE THE POWER ADAPTER AUTHORISED BY Wharfedale Pro ONLY! 3. Switch the global +48V phantom power on or off WIRING DIAGRAM SIGNAL INPUT MIC,CD etc.
CONNECT SERIES DIMENSIONAL DRAWING 50.9mm 183.8mm 208.0mm 151mm 52.8mm 293.9mm 183.8mm 360.
13 + STEREO INPUT CHANNEL(3-6) LINE IN MIC IN - MONO INPUT CHANNEL1 48V GAIN CLIP LED LO EQ HI LEVEL LEVEL PAN PAN L L R R USB TO MAIN MASER LEVEL USB IN L R PHONES -20dB 0dB 6dB CLIP MAIN OUT L MAIN OUT L MONITOR USB IN R USB IN L CR OUT L CR OUT R PHONES USB OUT R USB OUT L USB OPERATING MANUAL AND USER GUIDE BLOCK DIAGRAM—CONNECT 502USB USB TO PHONES
+ STEREO INPUT CHANNEL(3-6) LINE IN MIC IN - MONO INPUT CHANNEL(1-2) 48V GAIN GAIN GAIN CLIP LED LO LO LO MID MID EQ MID HI HI HI LEVEL LEVEL PAN PAN L L R R USB TO MAIN MASER LEVEL USB IN L PHONES -20dB 0dB 6dB CLIP R MAIN OUT L MAIN OUT L MONITOR USB IN R USB IN L CR OUT L CR OUT R PHONES USB OUT R USB OUT L USB CONNECT SERIES BLOCK DIAGRAM—CONNECT 802USB 14 USB TO PHONES
15 + LINE IN LINE IN STEREO INPUT CHANNEL(3/4-9/10) LINE IN MIC IN - MONO INPUT CHANNEL(1-2) 48V +4/-10dB GAIN HPF CLIP LED LEVEL LO EQ MID HI LEVEL PAN FX/AUX PAN FX/AUX L L R FX/AUX R FX/AUX MASER LEVEL FX SEND TO CONTROL 1 2 FX 3 -20dB 0dB 6dB CLIP L R MAIN OUT L MAIN OUT L MONITOR CR OUT L CR OUT R FX Send/AUX PHONES USB OUT R USB OUT L USB IN R USB IN L USB OPERATING MANUAL AND USER GUIDE BLOCK DIAGRAM—CONNECT 1002FX/USB
+ LINE IN LINE IN STEREO INPUT CHANNEL(5/6-11/12) LINE IN MIC IN - MONO INPUT CHANNEL(1-4) 48V +4/-10dB GAIN HPF CLIP LED LEVEL LO EQ MID HI LEVEL PAN FX/AUX PAN FX/AUX L L R FX/AUX R FX/AUX MASER LEVEL FX SEND TO CONTROL 1 2 FX 3 -20dB 0dB 6dB CLIP L R MAIN OUT L MAIN OUT L MONITOR CR OUT L CR OUT R FX Send/AUX PHONES USB OUT R USB OUT L USB IN R USB IN L USB CONNECT SERIES BLOCK DIAGRAM—CONNECT 1202FX/USB 16
OPERATING MANUAL AND USER GUIDE SPECIFICATIONS-502USB/802USB Model CONNECT 802USB Maximum Balanced Output Level (1%T.H.D. at 1kHz ) Main 1/4" Jack Balanced out +21dBu +/-1dBu Headphones output 150mw +/-5mw @ 32ohms Main 1/4" Jack Balanced out +21dBu +/-1dBu Headphones output 150mw +/-5mw @ 32ohms THD+N <0.025% @ + 14dBu +/-0.5dBu <0.025% @ + 14dBu +/-0.
CONNECT SERIES SPECIFICATIONS-1002USB/1202USB Model CONNECT 1002FX/USB CONNECT 1202FX/USB Maximum Output Level (1%THD at 1kHz ) Main 1/4" Jack Balanced out +26dBu ± 1dBu, Unbalanced out +21dBu ±1dBu Headphones output 150mw±5mw @ 32ohms Main 1/4" Jack Balanced out +26dBu ± 1dBu, Unbalanced out +21dBu ±1dBu Headphones output 150mw±5mw @ 32ohms THD+N <0.019% @ + 14dBu ±0.5dBu <0.025% @ + 14dBu ±0.
WHARFEDALE PRO LIMITED WARRANTY Wharfedale Pro Connect Series products are warranted of manufacturing or material defects for a period of one year from the original date of purchase. In the event of malfunction, contact your authorized Wharfedale Pro dealer or distributor for information. *Be aware that warranty details may differ from country to country. Contact your dealers or distributor for information. These terms do not infringe your statutory rights.
