User manual

Rinse aid makes it possible to dry the
dishes without streaks and stains.
Rinse aid is automatically added during the
last rinsing phase.
Follow these steps to fill the rinse aid dis-
penser:
Filling with rinse aid
1.
Press the release button
6
to open the
lid
5
of the rinse aid dispenser.
2.
Fill the rinse aid dispenser
3
with rinse
aid. The mark 'max' shows the maxi-
mum level.
3. Remove the spilled rinse aid with an ab-
sorbent cloth to prevent too much foam
during the washing program.
4. Close the rinse aid dispenser. Press the
lid until it locks into position.
Adjusting the rinse aid dosage
Factory set: position 3.
You can set the rinse aid dosage between
position 1 (lowest dosage) and position 4
(highest dosage).
Turn the rinse aid selector
4
to increase or
reduce the dosage.
Wash hands to remove any residue of
rinse aid from skin.
Use of combi detergent tablets
These products are detergents with com-
bined cleaning and rinsing functions. They
can contain also other cleaning agents.
Refer to the instructions from the manufac-
turer for the use of these products.
When you use tablets that contain rinse
aid:
• Set the lowest position for the rinse aid
dosage.
• Do not put rinse aid in the rinse aid dis-
penser. In this condition rinse aid indica-
tor light is always on when you switch on
the appliance.
.
Follow these steps if the drying results
are not satisfactory or you want to use
normal detergents again
1. Fill the rinse aid dispenser with rinse aid.
2. Adjust the rinse aid dosage.
LOADING CUTLERY AND DISHES
Helpful hints and tips
Caution! Only use the appliance for
household utensils that are suitable for
dishwashers.
Do not use the appliance to clean objects
that can absorb water (sponges, household
cloths, etc.).
• Before you load cutlery and dishes:
– Remove all remains of food and debris.
– Soften burnt remains of food.
• While you load cutlery and dishes:
– Load hollow items (e.g. cups, glasses
and pans) with the opening down.
– Make sure that water does not collect
in the container or in a deep base.
– Make sure that cutlery and dishes do
not lie inside one another.
– Make sure that cutlery and dishes do
not cover other cutlery and dishes.
– Make sure that glasses do not touch
other glasses.
– Put small objects in the cutlery basket.
• Plastic items and pans with non-stick
coatings can retain water droplets. Plas-
tic items do not dry as well as porcelain
and steel items.
• Put light items in the upper basket. Make
sure that the items do not move.
Caution! Make sure that the spray
arms can move freely before you start
a washing program.
Warning! Always close the door after
you load or unload the appliance. An
open door can be dangerous.
Loading the lower basket
Put saucepans, lids, dishes, salad bowls
and cutlery in the lower basket.
The rows of prongs in the lower basket can
be adjusted flat to load large dishes, pots,
pans and bowls.
westinghouse 7