User Manual

5
INSTALLATION
Fixing the rangehood
Use screw to fasten the rangehood to the wood
support from botton side.
Fixing the flue pipe
Fix a Ø 120mm, non-combustible, rigid flue pipe to the
exhaust transition duct using cable ties or duct tape.
IMPORTANT!
If using a flexible duct, always install duct with the
wire helix pulled taut to minimise pressure and noise.
Accessories can be bought from your local appliance
retailer, or in Australia at our online spare parts and
accessories store: shop.electrolux.com.au
Recirculating installation
If recirculating installation is used, carbon filters
are
recommended.
Replace the air intake grills with carbon filters.
Fixing the front panel and filter
Replace the front cover by replacing the 4x screws,
then refit the filters.
-Note:The Edision Screw lamps may have come loose
during transportation. Ensure that lamps are tighted
firmly into the socket before fixing the front panel.
AR125WV
Installing carbon filters
air intake grill
carbon filter
ST 4 x 32
Optional carbon filters diminish cooking odours in the
recirculated air. Depend
ing on the frequency of use and
the type
of cooking, the e
xpected life of carbon filters is
3
months.
Using carbon filters will reduce the airflow of
the angehood.
Ducting accessories - WRI500SB, WRI700SB
For best performance Ø 120mm ducting is recommended
roof cowl
AR125RC
AR125F
AR125FD
AR125FJ
wall vent kit
AR125WV
bend AR125B
E653140