INSTRUCTION MANUAL Highland Tufted Velvet Side Chair SKU: ID305 V1.
CARE & MAINTENANCE △ Clean the dust with a soft cloth △ Do not store in extremely wet environment.
PRODUCT AS SEMBLY Put chair back on a clean flat surface. 1 Align seat in the back pad as shown in the diagram. B Using SHORTER SCREW (4) with Washer (#2, 1). 4 2 1 DO NOT FULLY TIGHTEN. First HAND tighten then tightened using key up-to 60-80% only at this stage. 3 80% A 4 2 1 2 Align Hind legs in the seat pad as shown in the diagram. 4 3 2 1 80% 4 2 1 D D Using SHORTER SCREW (4) with Washer (#2, 1). DO NOT FULLY TIGHTEN.
PRODUCT ASSEMBLY 3 3 C 80% 5 2 1 C 1 2 5 Align front legs in the seat pad as shown in the diagram. Using LONGER SCREW (5) with Washer (#2, 1 ). DO NOT FULLY TIGHTEN. First HAND tighten then tightened using key up-to 60-80% only at this stage. 4 Put chair in the upright position and SIT ON THE CHAIR to press downwards on the seat pad. Ensuring that all 4 feet touch the ground and chair is leveled. Proceed to tighten all screws making sure the chair remains level when tightening.
PRODUCT ASSEMBLY 5 Close the black fabric cover 6 Page 4 of 4