User's Manual

Digital Repeater Line
DSP85 Series
WESTELL.COM
© 2016 Westell Technologies 14 June 2016 Doc. No. 960-1666-MNL rJ
1.877.844.4274 Page 55 of 77
B.2 Filter File Naming Conventions
B.2.1 700 MHz Filter Naming Convention
Westell Technologies digital repeaters use an alphanumeric file naming convention for its filter files. The descriptions
below will allow you to understand the methodology to determine the desired file for your application.
Table B-1: 700 MHz Filter Naming Convention
Column:
1
2
3
4
5
6
7
8
9
1
0
11
12
Definition:
Band
Mod
type
Block
1
Sub-
block
1
Block
2
Sub-
block
2
Block
3
Sub-
block
3
Block
4
Sub
-
block
4
Separator
Variant
l=
700MHZ
e=
E-UTRA
(Upper) l=
E-UTRA
(Lower)
A - C
0=Full
1-
7=Sub
A - C
0=Full
1-7=Sub
A -
C
0=Full
1-7=Sub
A -
C
0=Full
1-
7=Sub
-
0=Standard
NOTE
Modulation type determines the guard band at the edges of each passband. The
modulation type field will also be used to indicate a carrier who has a unique sub-
block designation.
Up to four sub-blocks may be defined, resulting in a maximum filename length.
All variant/guard band designators other than 0 (zero) and F are user-defined custom filters.
700 MHz examples
llA1B1-0 = (700 MHz band, E-UTRA mod type, Lower A1, B1, with standard guard band). leC0-0 = (700MHz band, E-
UTRA mod type, Upper C, with standard guard band).
llC1-0 = (700 MHz band, E-UTRA mod type, Lower C1, with standard guard band).
700 MHz upper block
Uplink Downlink
C0 776-787 746-757
700 MHz upper sub-block
Uplink Downlink
C1 776.5-786.5 746.5-756.5