3-Speed Air Filtration System Replacement Filters at WENProducts.com Model # 3410 bit.ly/wenvideo IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions.
TABLE OF CONTENTS Technical Data General Safety Rules Specific Safety Rules For Air Filtration System Electrical Information Know Your Air Filtration System Assembly and Adjustments Operation Maintenance Exploded View & Parts List Warranty 2 3 4 5 6 7 8 9 10 12 TECHNICAL DATA Model Number: 3410 Motor: 120 V, 60 Hz, 1A, 1/6HP Air Flow Speeds: 300, 350, and 400 CFM Filters: 1 micron inner/5 micron outer Sound Output: 50-60 dB Maximum Remote Control Distance: 26 feet Weight: 31 lbs 2
GENERAL SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, do not plug in your tool until the following steps have been read and understood. 1. READ and become familiar with this entire instruction manual. LEARN the tool’s applications, limitations, and possible hazards. 2. AVOID DANGEROUS CONDITIONS. Do not use power tools in wet or damp areas or expose them to rain.
GENERAL SAFETY RULES 15. DO NOT OVERREACH. Keep proper footing and balance at all times. Wear oil-resistant rubber-soled footwear. Keep the floor clear of oil, scrap, and other debris. 16. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good working order. Follow instructions for lubricating and changing accessories. 17. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts, jamming, breakage, improper mounting, or any other conditions that may affect the tool’s operation.
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS IN THE EVENT OF A MALFUNCTION OR BREAKDOWN, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. The plug MUST be plugged into a matching outlet that is properly installed and grounded in accordance with ALL local codes and ordinances. DO NOT MODIFY THE PLUG PROVIDED.
KNOW YOUR AIR FILTRATION SYSTEM NOT SHOWN: 1 - Inner Filter (present inside of machine on arrival) 2 - AA Batteries (Not Included) Unpacking Parts: Carefully unpack the air filter and all its parts. Do not discard the carton or any packaging until the air filter is completely assembled.
ASSEMBLY AND ADJUSTMENTS The air filter is designed to circulate air and filter wood and other non-metallic dust. The unit requires only minimal assembly. However, it is important to consider how and where to place the unit. When selecting a site, make sure there is a suitable power source nearby. Do not use extension cords with the air filter. HANGER PLACEMENT (Fig. 1) 1. Thread the locknuts (1) almost all the way up the hanger (2). 2.
OPERATION The air filter can be operated directly using the control panel or with the remote control. TURN ON AIR FILTER AND SPEED SETTINGS (Fig. 3 and 4) 1.Plug the power cord into an appropriate power source. 2.Press the ON/Speed button (1) on the control panel or the remote control to power on the air filter. The air filter will be running at low speed. The LO LED will light, indicating that the unit has been worked at low speed. 3.Press the ON/Speed button (1) again to change the speed.
MAINTENANCE WARNING: To reduce the risk of injury and electric shock, unplug the air filtration system from the power source before changing the air filters or servicing the unit. CHANGE THE FILTERS (Fig. 5 and 6) Check the inner and outer filters periodically, depending on the amount of use, and change the filters when needed. Clogged filters will reduce the amount of air circulating through the filter. Replacement filters for this unit available at WENproducts.
EXPLODED VIEW & PARTS LIST 10
EXPLODED VIEW & PARTS LIST No. Part Number Description Qty.
LIMITED TWO YEAR WARRANTY WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.