Item: KOAD1D Assembly Instructions Please visit our website for the most current instructions, assembly tips, to report damage or request parts. www.walkeredison.com Revised 08/23 -V-1 Copyright © 2018, by Walker Edison Furniture Co., LLC, All rights reserved. P.
General Assembly Guidelines and hammer Copyright © 2018, by Walker Edison Furniture Co., LLC, All rights reserved. P.
Parts List 1 3 2 3 UP UP 4 4 5 4 4 4 5 4 UP 6 UP 6 UP 6 6 UP Qty 1 Table top 01 pc 2 Rail 01 pcs 3 Octagonal panel 02 pc 4 Base panel 06 pcs 5 Base panel with cutout 02 pcs 6 Mounted rail 04 pcs P.
Hardware List A ø8*25mm Wooden dowel 40 pcs B ø3,5*35mm Screw 32 pcs C ø1/4"*40mm Screw 09 pcs D ø7"*50mm Screw 04 pcs Hex Key 01 pcs Washer 05 pcs Adesive Felt 04 pcs E F 12mm G Hammer recommended for assembly (not included) Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. P.
Step 1 A A A 4x A 6 A A A A 2x A A 3 A A A A A A . Insert wood dowel (A) into part 3 and 6. A A Step 2 ø8*25mm 40 D 6 6 D D 6 6 D E D E Fix parts 6 to each other with the screw (D) using a hex key (E). 04 E D ø7*50mm 01 Hex key P.
Step 3 5 B 5 B The UP label should be facing up as shown in step. B B 6 B Fix the cut-out panels 5 to the mounted rails 6 with the screws (B), using a Philips Screwdriver. B 04 ø3,5*35mm B Step 4 B 3 3 B B The UP label should be facing up as shown in step. B 5 5 Fix the cut-out panels 5 to the octagonal panels 3 with the screws (B),using a Philips Screwdriver. B 04 ø3,5*35mm P.
E Step 5 C F C C C C F E C F F F 2 1 F Fix the rails 2 on the table top 1 with the screws (C) and washer (F), using a hex key (E). 05 C 01 F E ø1/4*40mm 05 Washer Hex key G Step 6 G G Before attaching remove the adhesive protection. E G C G C C E 3 C C 3 2 1 Fix the pre-assembled base to the table top 1 with the screws (C), using a hex key (E) and attach the adhesive felt (G) in part 6. 04 C ø1/4*40mm 01 E Hex key G 04 Adesive Felt P.
Step 7 4 4 6 B 4 B B B B B B B B B B B B 4 4 4 B 4 B B B 4 3 B B B B 3 B B B B Fix the base panels 4 on the octagonal panels 5 and on the mounted rails with the screws (B), using a Philips Screwdriver. B B 24 ø3,5*35mm Step 8 125 lbs Distributed weight. P.
