BKMCPLAT Revised 02/2020
24 pcs 56 pcs 08 pcs 10x40 12 pcs 04 pcs 20 08 pcs
2x 9 10 Insert wooden dowels (E) into rails (4,,9,10) J J J J J J J J 2x Attach legs (3) to cross bar (4) using bolt (A) and heex key (J)
J J J J J Secure part (4) to part (8,9) using bolt (A) and hex key (J) O O O O O Connect parts (8,9) to parts (10,11) Secure parts with screw (O) O
J J J J J J J J J J Secure parts (10,11) to parts (8,9) with screw (A) and hex key (J) J J M M J N J N Attach Feet (12) to frame parts (10,11) using screw (M) and Union Screw (N). Union Screw (N) Should be on the inside of the bed frame, with screw (M),on the outside of the leg. Tighten by using with hex key(J) on both ends of the screw at the same time. The use Screw (D) and hex key (J) to secure legs(12).
P PP P Q 30mm P 20mm Q Secure feet to frame using screw(C). Attach the metal connector plate (Q) to the 2 corners of the bed with screws (P). Take care to aligne the plate over the sean of the two parts, as shown in the drawing, before seguring in place.
Step 09
