Item # : B48ARB2DR Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 09/06/2020 (I) Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. V. The three main types of hardware used to assemble this product are : wood dowels , screws and bolts. The provided glue is to secure wood dowels in place .
Parts List 15 1 5 14 13 4 3 17 16 6 11 2 15 9 8 7 14 13 17 16 10 10 12 10 Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Hardware List A Ø8x30mm Wooden dowel 12 pcs B Ø6x35mm Cam bolt 16 pcs C Ø15x11mm Cam lock 16 pcs D Ø30mm Sticker 16 pcs E Ø6x38mm Screw 6 pcs F Ø3x12mm Screw 24 pcs G M4 Hex key 1 pc H Ø1/4''x12mm Bolt 4 pcs J Ø1/4''x25mm Bolt 8 pcs K Ø1/4''x25mm Bolt 7 pcs L Ø4x32mm Screw 12 pcs Glue tube 1 pc Screw 6 pcs Plastic wedge 6 pcs Drawer slider 2 sets M N P Q Ø3x17mm * Note: This piece comes preassembled for shipping purposes and must be disass
Step 1 A A A A A 4 3 A A A 5 A A A A Insert wooden dowel (A) into parts (3,4,5) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 2 B B B B 1 B B Secure cam bolt (B) into part (1) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 3 Slider arm Q Slider arm Slider bracket Q Slider bracket Pick up the slider arm (Q) and separate the slide Runner for the following Steps. Extend the Slide .Runner all the way forward,press the plastic release lever of the alider arm up and pull the Slide Runner Complete out . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 4 Finished edge 3 4 Q F F F F F Finished edge 4 5 Q F F F F F Using Screw (F) attach part (Q) to parts (3,4,5) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 5 Q F F F Q F 14 F F 13 x2 Using Screw (F) attach part (Q) to parts (13,14) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 6 3 E 4 E Finished edge E 5 G 2 E E E Using Screw (E) attach part (2) to parts (3,4,5) with Hex key (G) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 7 5 2 6 3 Put part (6) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 8 2 3 1 C 3 C C 4 C C C 5 Using Cam lock (C) secure part (1) into parts (3,4,5) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 9 10 10 Concave Hole K J G 10 7 J Using Bolts (J,K) attach part (10) to part (7) With Hex key (G) as per diagram. Note :Do not fully tighten all bolts . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 10 10 G K 10 8 10 K K Using Bolt (K) attach part (8) to part (10) With Hex key (G) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 11 10 K 10 9 10 K G K Repeat the last step as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 12 8 G 7 H J 8 H J J 1 J 9 H 2 H G J J 1 J Using Bolt (H) attach parts (8,9) to part (2) , and using Bolt (J) attach part (7) to part (2) and parts (8,9) to part (1) With Hex key (G) as per diagram. Note:Fully tighten all bolts . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 13 B B B B 11 B B B B B 12 B Secure Cam bolt (B) into parts (11,12) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 14 14 L L 15 13 L L x2 Secure Screw (L) attach parts (13,14) to parts (15) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 15 16 14 13 15 x2 Put part (16) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 16 17 L 15 L x2 Secure Screw (L) attach part (15) to parts (17) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 17 14 C 2 3 C C 11 17 C 13 C Using Cam lock(C) secure part (11) to parts (13,14,17) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 18 14 C 2 3 C C 12 17 C 13 C Using Cam lock(C) secure part (12) to parts (13,14,17) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 19 N P P Using screw (N) secure plastic wedge (P) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 20 D D D D D D D D Place sticker (D) cover the holes as per diagram . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 21 Slider arm OR Q Slider bracket 12 11 Assembled the drawers as per diagram Note :If the drawer does not go in smoothly .Press or lift the plastic release lever . Pull out the slider bracket from the slider arm then re-assembled the drawer until they were going in smoothly well . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 22 Position the assembled unit at the desired location ,if necessary adjust the floor leveler at the bottom of the legs to level the unit . Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 23 Final Assembly Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
