HAP 200 Operating Instructions 1 of 6 FR EN Device Overview 3 PT ES IT 5 GR Nozzle TR Nozzle adaptor 6 CZ Tool Stand 5 PL Pump Activation Push Button 4 HU Hot Air Hose 3 SK 2 SL Connector with Cable EE 4 1 LV 2 FI DK SV NL 1 LT 6
-6 HAP 200 Thank you for placing your trust in our company by purchasing the Weller HAP 200 Hot Air Tool. This product meets or exceeds the requirements established by Weller for superior performance, versatility and quality. 1. Cautions! / Warnings! Please read these Operating Instructions and the attached Safety Information carefully prior to initial operation. Failure to observe the safety warnings may result in accident, injury, or risk to health.
HAP 200 3-6 Technical Data HAP 200 Heating output 200 W Heating voltage 24 V AC 15 l/min Temperature range 100°F and 1000°F (50 °C up to 550 °C) Temperature accuracy ± 80 °F (± 30 °C) 3. Place the HAP 200 Hot Air Tool into the Tool Stand (4). 4. Insert the connector (1) of the HAP 200 into the 7-pin receptacle on the control unit, and lock in place by twisting clockwise slightly. 5. Push the air hose of the HAP 200 (2) onto the “Air” port on the control unit. 6.
-6 HAP 200 3.1 Operating guidelines Caution! • Z Always use Weller original hot air nozzles! Z Use of Non-Weller nozzles may result in damage to the Hot Air Tool and may void the warranty. The HAP 200 is supplied with an 8 mm socket wrench. Use this wrench to replace the nozzles. Tighten the enclosed nozzle adapter on to the heater using the supplied open-end wrench. Note The enclosed nozzle adaptor (5) (0058761028) allows the HAP 1 nozzles to be used on the HAP 200.
Subject to technical change without notice. 7 Disposal Dispose of replaced equipment parts, filters or old devices in accordance with the rules and regulations applicable in your country.
-6 HAP 200 Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary, from state to state. www.Cooperhandtools.com Weller is a registered Trademark and registered Design of Cooper Industries, Inc. U.