Brochure/Catalogue
C
Enclosures
C.16 2712630000
Klippon
®
TB MH 262615 Depth 150 mm
Height / Width / Depth 260 / 260 / 150 mm
9LHZZLWKRXWFRYHU
VHDODQGVFUHZ
0LQWHUQDOH[WHUQDO
JURXQGFRQQHFWLRQ
0LQWHUQDOJURXQG
FRQQHFWLRQ
Ordering data
Stainless steel 1.4404 316L, electropolished
Order No.
0 gland plates 1194600000
1 gland plate - positioned at the bottom (B) 1194610000
2 gland plates - positioned at top and bottom (A & B)* 1194620000
3 gland plates - positioned at bottom, left and right (B, C & D) 1194630000
4 gland plates - positioned at top, bottom, left and right (A, B, C & D)* 1194640000
Note
*Minimum order quantity (20 pieces)
Guide value for max. number of terminals (industry)
Assembly with terminal vertical horizontal
2.5 mm² 2x31 2x31
4 mm² 1x26 1x26
6 mm² 1x19 1x19
10 mm² 1x15 1x15
16 mm² 1x12 1x12
35 mm² 1x9 1x9
Note
*For the enclosure versions with no, one or two gland plates, the horizontal distance of the
mounting feet is reduced by 30 mm.
When mounting modular terminals please leave a distance of 10 mm to the ends of the DIN rail.
Ordering recommendations:
TS 35 Mounting rail with clamping yoke technology WDU, spring-cage terminal ZDU or PUSH
IN technology A2C
TS 32 Mounting rail with clamping yoke technology SAK
TS 15 Mounting rail with clamping yoke technology AKZ
Order information for terminal blocks, please refer to online catalogue
Accessories
Note
*Packing unit (PU) = 20 pcs., sufficient for 10 fixtures
**Packing unit (PU) = 20 pcs., fixing screws 1274150000 available separately
Guide value for max. number of cable entries
Cable entries A / B C / D
M12 20 15
M16 11 8
M20 9 7
M25 4 3
M32 3 2
M40 3 2
M50 2 2
M63 0 0
M75 0 0
Note
Our IP68 brass cable glands serve as a reference for these recommended values.
Dimensions of mounting plate
199.00
183.00
189.00
Ø 7
205.00
Mounting plates and fastening screws Order No.
Steel sheet, zinc plated 1193950000
With hole pattern, sheet steel, galvanised 2022060000
Stainless steel 1.4301 natural 1193820000
With hole pattern, natural stainless steel 1.4301 1257660000
Fastening screws for mounting plates 0642600000
Fastening screws for terminal rails* 1274150000
Mounting rails**, TS35x7.5
Horizontally 8000006721
Vertical 8000006709
Stainless steel spacer M6 x 8, Set of 4
10 mm length 0935110000
15 mm length 0935120000
20 mm length 0935130000
30 mm length 0935140000
Gland plates - 3 mm with M6 earth studs
Top and bottom sides (A & B), electropolished stainless steel 1.4404 2022930000
Left and right sides (C & D), electropolished stainless steel 1.4404 2023090000
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404 1256290000
Left and right sides (C & D), electropolished stainless steel 1.4404 1256310000
Mounting screw, stainless steel 1.4404 1253230000
Rain hoods
Stainless steel 1.4301, mirror-polished 1281370000
Stainless steel 1.4404, electro-polished 1314100000
Label holder
70 x 70 angled stainless steel 1.4301 1279320000
130x50 stainless steel 1.4301 1283450000
100x25 stainless steel 1.4301 1257640000
Document holders
For DIN A6 size documents 1252780000
Set of fixings*
For label holders, rain hoods and document holders (rivet) 1252190000
For plastic (Trafolyte), identification plate (screw) 1285200000
Earthing stud
Stainless steel 1.4404, M10 1192690000
Klippon
®
TB MH - Multi Hinge