Brochure/Catalogue
Reliable device connections are essential to meet the maxi-
mum power and voltage requirements found in power
electronics applications. Our OMNIMATE Power series of
terminals and connectors provide you with many unique
features while ensuring maximum safety and reliability. The
design of the mating proles makes it impossible to acciden-
tally plug the wrong connectors together. The connectors can
also make use of additional attachment mechanisms such
as latches, interlocks or screws. You can select the spring
(“PUSH IN”) or screw connection for the wire, depending
on your application requirements. To further support proper
on-site wiring, we can print all of our OMNIMATE Power
products with customised wire assignment labelling.
OMNIMATE Power connectors provide plug-in connectivity
solutions for power electronics applications and state-of-the-
art drive systems. The range sets a new standard – with in-
creased safety and innovative details such as the pluggable
shield, integrated signal contacts and one-handed operation.
The standard connectors and IT-mains connectors are suit-
able for wire cross-sections of 2.5 mm², 6 mm² and 16 mm.
OMNIMATE Power PCB terminals provide a sturdy, direct-
connect solution to deal with extreme current and voltage
requirements for many power electronics applications: such
as solar inverters, frequency converters, servo-controllers
and power supplies. They come in 10.16 mm, 12.7 mm and
15.0 mm pitches, and can connect wires up to 50 mm².
Finally, the OMNIMATE Power feedthrough terminals are
a universal solution for feeding currents of varying magni-
tudes through device panels. They are suited for connecting
wires from 4 mm² to 95 mm².
1.
Power supply
High-performance connectors and terminals for circuit boards; terminals for feeding through
housing walls
A touch-protection shield on both sides of the plug-in con-
nection helps to minimise the risk from high inverse voltages.
This means we are in full compliance with device approval
guidelines as laid out in IEC 68100-5-1.
The inverted BLL or BVL female headers, when used together
with the correct SLF/SLZ or SVF/SVZ male plugs, provide
3 mm of touch protection on both sides of the unplugged
connection.
More standards compliance, less compromise: OMNIMATE
Power for IT power systems. The features built into these
connectors simplify your design-in and approval processes
and ultimately make your operations more reliable.
For non-pluggable connectivity solutions, we recommend
PCB terminals in 10.16 mm, 12.7 mm and 15.0 mm pitches,
for connecting wires up to 25 mm², or device feedthrough
terminals for 4 mm² to 50 mm².
When working with high voltages, the spacing between
poles for the PCB terminals and device feedthrough
terminals can be widened.
2.
Intermediate circuits (DC-Link)
Device feedthrough terminals for direct connections, PCB terminals, connectors carrying high voltages
safely