Brochure/Catalogue
C
Enclosures
C.112 2712630000
Klippon
®
K 61 Depth 91 mm
Height / Width / Depth 160 / 260 / 91 mm
;;IRUDQG
$
%
'
&
(
)
Ordering data
powder-coated (RAL 7001)
Order No.
Standard (CR seal) 9529250000
Standard (silicone seal)* 1937730000
unpainted
Standard (CR seal) 0573600000
Standard (silicone seal)* 1939700000
Note
The colours of painted enclosures may vary under certain circumstances. Ex-enclosures are availa-
ble on request. *Delivery time on request
Guide value for max. number of terminals (industry)
Assembly with terminal vertical horizontal
2.5 mm² * 1x39
4 mm² * 1x33
6 mm² 1x24
10 mm² 1x20
16 mm² 1x16
Note
The mounting rails are designed to be installed directly.
Assembly with terminals provides for 10mm clearance to the ends of the mounting rail.
Order recommendations:
TS 35 mounting rail with WDU clamping yoke technology, ZDU spring-cage terminal block or A2C
PUSH IN technology
Ordering information for the terminal blocks, please refer to the online catalogue.
*For fitting the enclosures with terminal blocks, please refer to the Terminal block catalogue
or the SAK series. We recommend BK6 or BK6CRN (0625220000) for vertical installations.
There are no specified mounting options available for mounting the enclosure in a vertical
position. There are no pre-defined mounting points set within this enclosure for installing internal
equipment in a vertical position.
Accessories
Note
The accessory sets contain the necessary mounting materials. Necessary on use of 2 hinges per
longitudinal side. Helicoil for outdoor applications, available ex-works.
Guide value for max. number of cable entries
Guide value for max. number of cable entries A / B C / D
M12 27 8
M16 23 6
M20 13 3
M25 8 2
M32 4 1
M40 3 1
M50
M63
Note
Our IP68 brass cable glands are used as the reference for these guideline values.
Dimensions of mounting plate
245
2
145
Ø 7
230
Terminal rail, Set Order No.
35 mm width 1910120000
Mounting plate
Steel sheet, zinc plated 3073120000
Hinge, diecast zinc, Set
1580360000
External mounting feet, set of 4
Stainless steel 1.4301 natural 9527590000
Torx
®
screw driver
not insulated, Torx
®
TH20 9009160000
Earthing stud
Brass, M6 1277250000
Stainless steel 1.4404, M6 1283430000
Brass, M10 1277220000
Stainless steel 1.4404, M10 1283440000
Pressure compensation elements
Stainless steel 1.4305, M12 1868550000
Polyamide 6, M12 1868570000
Klippon
®
K – Aluminium enclosures