Brochure/Catalogue
C
Enclosures
C.252712630000
Klippon
®
TB MH 453820 Depth 200 mm
Height / Width / Depth 458 / 382 / 200 mm
9LHZZLWKRXWFRYHU
VHDODQGVFUHZ
0LQWHUQDOH[WHUQDO
JURXQGFRQQHFWLRQ
0LQWHUQDOJURXQG
FRQQHFWLRQ
Ordering data
Stainless steel 1.4404 316L, electropolished
Order No.
0 gland plates 1195050000
1 gland plate - positioned at the bottom (B) 1195060000
2 gland plates - positioned at top and bottom (A & B)* 1195070000
3 gland plates - positioned at bottom, left and right (B, C & D) 1195080000
4 gland plates - positioned at top, bottom, left and right (A, B, C & D)* 1195090000
Note
*Minimum order quantity (10 pieces)
Guide value for max. number of terminals (industry)
Assembly with terminal vertical horizontal
2.5 mm² 3x71 4x54
4 mm² 2x59 3x46
6 mm² 2x44 3x34
10 mm² 2x36 2x27
16 mm² 2x29 2x22
35 mm² 1x22 1x17
Note
*For the enclosure versions with no, one or two gland plates, the horizontal distance of the
mounting feet is reduced by 30 mm.
When mounting modular terminals please leave a distance of 10 mm to the ends of the DIN rail.
Ordering recommendations:
TS 35 Mounting rail with clamping yoke technology WDU, spring-cage terminal ZDU or PUSH
IN technology A2C
TS 32 Mounting rail with clamping yoke technology SAK
TS 15 Mounting rail with clamping yoke technology AKZ
Order information for terminal blocks, please refer to online catalogue
Accessories
Note
*Packing unit (PU) = 20 pcs., sufficient for 10 fixtures
**Packing unit (PU) = 20 pcs., fixing screws 1274150000 available separately
Guide value for max. number of cable entries
Cable entries A / B C / D
M12 50 55
M16 34 38
M20 23 24
M25 18 21
M32 10 11
M40 8 9
M50 4 4
M63 3 3
M75 2 3
Note
Our IP68 brass cable glands serve as a reference for these recommended values.
Dimensions of mounting plate
321.00
305.00
387.00
403.00
Ø 7
Mounting plates and fastening screws Order No.
Steel sheet, zinc plated 1193990000
With hole pattern, sheet steel, galvanised 2022590000
Stainless steel 1.4301 natural 1193860000
With hole pattern, natural stainless steel 1.4301 1257700000
Fastening screws for mounting plates 0642600000
Fastening screws for terminal rails* 1274150000
Mounting rails**, TS35x7.5
Horizontally 8000006724
Vertical 8000006713
Stainless steel spacer M6 x 8, Set of 4
10 mm length 0935110000
15 mm length 0935120000
20 mm length 0935130000
30 mm length 0935140000
Gland plates - 3 mm with M6 earth studs
Top and bottom sides (A & B), electropolished stainless steel 1.4404 2023510000
Left and right sides (C & D), electropolished stainless steel 1.4404 2023520000
Gland plates and screws - 6 mm
Top and bottom sides (A & B), electropolished stainless steel 1.4404 1256510000
Left and right sides (C & D), electropolished stainless steel 1.4404 1256520000
Mounting screw, stainless steel 1.4404 1253230000
Rain hoods
Stainless steel 1.4301, mirror-polished 1281460000
Stainless steel 1.4404, electro-polished 1314200000
Label holder
70 x 70 angled stainless steel 1.4301 1279320000
130x50 stainless steel 1.4301 1283450000
100x25 stainless steel 1.4301 1257640000
Document holders
For DIN A6 size documents 1252780000
For DIN A5 size documents 1252750000
Set of fixings*
For label holders, rain hoods and document holders (rivet) 1252190000
For plastic (Trafolyte), identification plate (screw) 1285200000
Earthing stud
Stainless steel 1.4404, M10 1192690000
Klippon
®
TB MH - Multi Hinge