Brochure/Catalogue

Plastic enclosures
Klippon
®
POK TBF MPC FPC
T
Material Polyester Polyester Polycarbonate Polycarbonate
Material Specification Glass-bre reinforced polyester in
accordance with DIN 16913
Glass-bre reinforced polyester,
polycarbonate transparent cover
Sea water resistance very good very good very good very good
UV resistance good good good good
Halogen free / cadmium free x / x x / x x / x x / x
Surface finish Grey (industrial version),
Black (Ex version)
grey grey grey
Intended use Ex-areas, energy production,
transportation, process industries,
port facilities
Building installation, transportation,
energy production, building sites,
manufacturing industry, packaging
industry
Building installation, transportation,
energy production, building sites,
manufacturing industry, packaging
industry
Building installation, transportation,
energy production, building sites,
manufacturing industry, packaging
industry
Dimensions
H x W x D (min.) in mm
75x80x55
186x151x140
125x75x75
200x200x132
H x W x D (max.) in mm 250x600x120
603x603x175/210 250x175x150
600x400x132
Geometry
5 standard depths
3 standard depths 4 standard depths 1 standard depth
Specific characteristics Ex version
(Black)
Industrial version
(grey)
Gland plates none none none none none
Type of gasket
Shaped seal Shaped seal
O-ring Foam seal Foam seal
Seal material Silicone Chloroprene Polyurethane Polyurethane Polyurethane
Enclosure attachment
4 holes for M4
to M6 screws
4 holes for M4
to M6 screws
4 holes or external mounting brackets
(accessory)
4 holes or external mounting brackets
(accessory)
4 holes or external mounting brackets
(accessory)
Installation mounting M4 to M6
threaded holes
M4 to M6
threaded holes
4 or 6 clamping screws M4 Self-tapping screws Self-tapping screws
Temperature range -55 °C…+100 °C -40 °C…+100 °C
-50 °C...+130 °C (Continuous temperature
max. 70 °C)
(grey);
-35°C ...+120°C ((Continuous temperature
max. 70 °C) (transparent)
-50 °C...+100 °C (grey);
-40 °C...+60 °C (transparent)
-50 °C...+100 °C (grey);
-40 °C...+60 °C (transparent)
Impact resistance
7J in accordance
with IEC60079-0
IK 08 (5J) in accordance
with DIN EN 50102
IK08 (5J) in accordance with IEC 62208,
IK10 (20J) in accordance with IEC 62262
IK 08 (grey),
IK 06 (transparent)
IK 08 (grey),
IK 06 (transparent)
IP – protection class IP66 IP66 IP66 (transparent lid)
IP67 (grey lid)
IP66, IP67 IP66, IP67
Flammability rating UL94 V0 UL94 V0 UL94 HB (grey),
V2 (transparent)
V2 V2
Surface resistance (in ohms) <10
9
10
12
10
12
10
16
10
16
Approvals
ATEX x
AEx x
CCOE / INMETRO
EAC x x
cULus x x
IECEx x
NEPSI / KOSHA - / x
RMR / LR / DNV GL x / x / x - / x / x
Configuration
Fastening screws for the
mounting plate
grey or transparent lid grey or transparent lid grey or transparent lid
Introduction
C
C.4 2712630000
Enclosures