Brochure/Catalogue

D
Cable entries
D.612712630000
Breather drains – Klippon
®
BDX
Thread
SW
Thread
5
1.5
Ø *
L
L1
The BDX compensating element is used for ventilating the enclosure and preventing a
buildup of moisture, particularly in Ex applications.
Technical data
Material Brass / Stainless steel 1.4404 (316L)
Protection class IP66
Impact resistance 7 J ATEX version
Filter Bronze insert (90% copper, 10% tin)
Air flow 0.25 l / 1 h
Sealing Silicone / O-Ring
Temperature range -60 °C...200 °C
Colour Natural
Note
Ordering data
Type Material Thread L / L1 SW *Diameter Qty. Order No.
KLIPPON BDX M20 B Brass M 20 22 / 10 27 26.20 1 2519520000
KLIPPON BDX M20 S Stainless steel 1.4404 (316L) M 20 22 / 10 27 26.20 1 2519550000
KLIPPON BDX M20X15 S Stainless steel 1.4404 (316L) M 20 22 / 15 27 26.20 1 2519570000
KLIPPON BDX M25 S Stainless steel 1.4404 (316L) M 25 22 / 10 32 31.00 1 2519590000
Note
• The breather-drain is only to be fitted on the bottom side of the enclosure, aligned vertically with the thread upwards, and at the lowest point to permit proper drainage.
• The water flow rate has been tested by a water filled empty enclosure (no pressure or heat producing internal components). The water flow rate can slightly differ by influences from operational para-
meter and environmental conditions.
• Installation specifications and torques can be found in the installation instructions.
• For further information please use our online catalogue: catalog.weidmueller.com.
Ex-Compensating elements