Brochure/Catalogue
Unmanaged Switches Gigabit Ethernet – Basic/Value Line
5 and 8-Port unmanaged Gigabit Ethernet Switches
• Gigabit Ethernet on all ports
• Variants with slots for SFP transceivers
• Redundant dual 12/24/48 V DC power inputs
• Relay output warning for power failure and port break alarm
• Broadcast storm protection
• Supports jumbo frame transmission
Technical data
Technology
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT (X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for ow control
IEEE 802.3az for energy-efcient Ethernet
Processing Type Store and Forward
Flow Control IEEE 802.3x ow control, back pressure ow control
Switch Properties
MAC Table Size 8 K
Packet Buffer Size IE-SW-BL05-4GT-Series: 1 Mbit
IE-SW-VL08-Series: 4 Mbit
Jumbo frame support IE-SW-BL05-4GT-Series: 10 KByte
IE-SW-VL08-Series: 9.6 KByte
Interface
Fibre Ports 100/1000BaseSFP
RJ45 Ports 10/100/1000BaseT(X) auto negotiation speed,
Full/Half duplex mode, and auto MDI/MDI-X connection
DIP Switches Port fault alarm enable/disable
Broadcast storm protection enable/disable
Jumbo frame support enable/disable
IEEE 802.3az energy saving enable/disable
Switching between 100BaseSFP and 1000BaseSFP at SFP slot
Alarm Contact 1 relay output with current carrying capacity of 1 A at 24 V DC
Power Requirements
Input Voltage 12/24/48 V DC (9.6 to 60 V DC), redundant dual inputs
Input Current IE-SW-BL05-4GT-1GS: 0.14 A at 24 V
IE-SW-VL08-8GT: 0.29 A at 24 V
IE-SW-VL08-6GT-2GS: 0.31 A at 24 V
Connection 1 removable 6-contact terminal block
Reverse Polarity Protection Present
Physical Characteristics
Housing Metal, IP30 protection
Dimensions (W x H x D) IE-SW-BL05-4GT-Serie: 29 x 135 x 105 mm (1.14 x 5.31 x 4.13 in)
IE-SW-VL08-xGT: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight IE-SW-BL05-4GT-Series: 290 g
IE-SW-VL08-Series: 630 g
Installation DIN-Rail, wall (with optional mounting kit)
Environmental Limits
Operating Temperature Standard Models: -10 to 60 °C (14 to 140 °F)
Wide Temp. Models: -40 to 75 °C
(-40 to 167 °F) (on request)
Storage Temperature -40 to 85 °C (-40 to 185 °F)
Ambient Relative Humidity 5 to 95 % (non-condensing)
Regulatory Approvals
Safety UL 508
Hazardous Location UL/cUL Class I, Division 2, Groups A, B, C, and D;
ATEX Zone 2 Ex nA nC IIC T4 Gc
Regulatory Approvals
EMC
EN 55032/24
CISPR 32, FCC Part 15B Class A
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Maritime DNV-GL
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
MTBF (mean time between failures)
Time IE-SW-BL05-4GT-Serie: 2,823,446 hrs
IE-SW-VL08-Serie: 2,424,649 hrs
Database Telcordia (Bellcore), GB
Warranty
Warranty Period 5 years
Ordering Information
Version Model Type Operating
Temperature
Order No.
4 * RJ45 10/100/1000BaseT(X)
1 * Combo Port (10/100/1000
BaseT(X) or 100/1000BaseSFP
IE-SW-BL05-4GT-1GS
IE-SW-BL05T-4GT-1GS
-10 to +60 °C
-40 to +75 °C
2435400000
2435410000
8 * RJ45 10/100/1000BaseT(X) IE-SW-VL08-8GT
IE-SW-VL08T-8GT
-10 to +60 °C
-40 to +75 °C
1241270000
1286860000
6 * RJ45 10/100/1000BaseT(X), IE-SW-VL08-6GT-2GS -10 to +60 °C 1241280000
2 * Combo Port (10/100/1000
BaseT(X) or 100/1000BaseSFP)
IE-SW-VL08T-6GT-2GS -40 to +75 °C 1286870000
Accessories
Model Type Order No.
19'' Rack Mounting Kit RM-KIT 1241440000
Wall mounting kit IE-WALLMOUNT-KIT-46MM 1504440000
Wall mounting kit IE-WALLMOUNT-KIT-30MM 1504450000
Note
IE-SW-BL05-4GT-1GS and IE-SW-VL08GT-2GS support 1x or 2x 100/1000Base SFP slots.
Corresponding SFP modules for Fast/Gigabit Ethernet, see page F.2.
T \ %
IE-SW-VL08-Serie
IE-SW-BL05-Serie
B
Industrial Ethernet Switches
B.6 2596860000