Brochure/Catalogue
8
Cabling solution for AIDA/PROFINET
Data transmission – copper
For the transmission of data via copper cable, we recom-
mend our proven, reliable and powerful
STEADYTEC
®
technology. The simple assembly of the connectors without
the need for special tools makes wiring less time-consuming,
which in turn reduces costs. The connectors are clearly
marked and have a 4-pole design for PROFINET to prevent
the wires from being mixed up.
For use in the eld, we have enclosed these properties in
a sturdy IP67 housing, variant 14. The connector is therefore
well-protected and can even be used in the harshest of
environments.
The comprehensive FreeCon Passive connection/coupling
elements signicantly extend the application options. In
the double junction box or double coupling versions, power
(24 V / 16 A) and PROFINET/RJ45 are transmitted simulta-
neously in a single housing. This saves space and reduces
installation times. Here too, FreeCon offers the familiar
exible installation options such as the rotatable mounting
foot or the alternative fastening option via a cut-out in the
mounting plate. The anges are also tted with an arrester
strap to prevent the protective cap from being lost. The strap
is integrated in the ange gasket and does not need to be
installed separately.
PushPull data connectors for Ethernet or PROFINET
transmission, max. 8 x AWG22, Cat.6
A
IP20 RJ45: eld assembly connectors
for Ethernet or PROFINET for use in
control cabinets
FreeCon: junction box/coupling and cable coupler for PushPull
signal or PushPull data connectors. Installation options: at the
front on a mounting plate or with supplemental mounting foot.
Installation of the cable coupler: ying or with additional support
frame
FreeCon: combined double junction box/coupling for
PushPull power and PushPull data connectors,
installation options: at the front on a mounting plate
or with a mounting foot.
FreeCon active PROFINET repeater for PushPull
Var.14 connectors according to IEC 61076-3-117
with RJ45 and PushPull Power according to
PROFINET-specication.