Brochure/Catalogue
In critical network systems such as the radio base station,
optimum power distribution is a key element in managing
power capacities. Intelligent power distribution means that
peak loads are balanced out and power consumption is
monitored. The particular challenge here is high performance
transmission at the same time within a tight installation
situation on the component front.
Our compact Power plug-in connectors can be installed
without the need for any special tools. So you not only
shorten installation times and cut installation costs, but also
take up less space on the front panel in the control cabinet
thanks to its slim width.
SV/BVF 7.62 HP male headers and female plugs:
• Less space required due to self-snapping-one-handed
locking ange
• Complying with UL1059 600 V Class C and
IEC 61800-5-1
• Convenient connection for even short stripped and thin
conductors thanks to an opened contact point with a
latching “PUSH IN” lever
• Operational and industrial safety due to completely
failsafe mating prole
• Maximum safety due to bi-directional nger safety, even
in the event of reverse polarity voltage from the power
electronics
With a suitable colour scheme and application-appropriate
labelling all the way through to special modications – our
HP series offers a large selection of variants and accessories.
Reliable transmission of high-frequency data is a basic
requirement for radio infrastructure. Applications such as mobile
internet and ever-growing data rates call for individual
components to be of a high quality. Secure connectivity is
indispensable for optimum data wiring within a radio cell.
Conventional interface solutions often lead to voice and data
losses due to inadequate shielding. In addition, the speed
required cannot be achieved due to transmission properties being
too low.
Our shielded RJ45 connection components for the PCB meet the
requirements according to IEC 60603-7-5 and withstand harsh
environments in the eld and high data rates such as those
required in mobile internet.
• Optimum adaptation to various housing designs due to
variable outlet directions (90°, 180°, 270°)
• Electromagnetic compatibility and protection through
shielding
• Cost-optimised production thanks to automated assembly
using the SMD or THR process
• Transmission properties equipped for the future with the Cat.6
standard for Gigabit applications
If you are drawing up a customised plan, we will help you with
the Weidmüller cable congurator. You can choose between
copper and bre-optic conductors as well as a variety of different
plug types – fully in line with your requirements and
specications.
Environmental conditions such as temperature uctuations
and water penetration can cause extensive damage. To
prevent this, the sensors' ambient statuses are ascertained
and forwarded to a control system in the radio base station
for evaluation. The monitored aspects include for example,
battery condition, door status and humidity in the control
cabinet. When it comes to this sensitive information, precise
transmission of what are often analogue signals, is extremely
important.
Our B2CF OMNIMATE compact plug-in connectors ensure
that you have a constant overview of all devices’ smooth
operation. As a result, you can respond quickly by
introducing counter-measures should a fault occur.
• Create high contact density with up to four levels on
top of one another (with a 3.50 mm pitch) and a max.
connection cross-section of up to 1.5 mm²
• Gentle in terms of component usage, inherently safe and
with automatic locking – our lock & release lever is what
makes all this possible
• Permanently secure contact connections, even in the
event of severe vibrations and high conductor pull-out
forces, thanks to optimised spring steel
• Contact security with an articial ageing test complying
with IEC 61984
We also offer gold contacts for particularly challenging
applications. These offer outstanding protection against
vibration, are corrosion-resistant and provide extreme
precision with a long mechanical service life.
2. Power distribution
Space-saving and convenient
4. Transmitting and receiving unit
Secure and without loss
3. Monitoring
Precision – where it really matters
RJ45 PCB sockets and assembled data cables
OMNIMATE Power components for the safe handling of high voltages
PCB terminal blocks can be assembled fully automatically for the reow process (SMT), with
“PUSH IN” wire connection technology
The switch-mode power supply converts incoming AC voltage
into DC voltage and supplies all of the components integrated in
the radio base station. Blackouts and voltage drops in the grid are
bypassed due to an integrated supply management concept
using alternative sources of electricity, such as batteries,
photovoltaic units or generators. Ongoing operations are
therefore maintained, even in an emergency. Actually in the event
of extreme ambient temperatures, only minimal power losses
occur.
Thanks to power reserves, our LXXX 15.00 OMNIMATE PCB
terminal blocks and the feed-through terminals of the WGK series
guarantee maximum system availability in the event of
temperature uctuations and overload. They also cut a
convincing gure with robust steel clamping yoke technology.
LXXX 15.00 OMNIMATE Power terminal:
• Error-free connections thanks to integrated “Wire Guard”
protection
• Resilient and secure with an RTI (Relative Temperature Index)
of 120°C
• Conductor connections of up to 50 mm² / AWG 1 and 150 A,
with a maintenance-free steel clamp
• Smoothly integration without any additional covering thanks
to extended clearance and creepage distances complying with
IEC 61800-5-1
WGK OMNIMATE Power feed-through terminal:
• Wide performance spectrum for currents of 32 to 232 A and
conductor cross-sections of 4 to 95 mm² / AWG 4/0
• Various types of connections: castable solder connections,
cable-lug-stud connections, clamping yoke screw connections
• High contact force and maintenance-free, permanently
gastight connection
1. Power supply
Maximum availability
OMNIMATE plug-in connectors with “PUSH IN” connection Compact PCB components with a 3.5 mm pitch, in part also with a double-row “PUSH IN” connection
High humidity and uctuating temperatures due to waste heat
or solar radiation can limit the performance and service life of
electronic components. In particular, increased humidity can
cause component corrosion, creeping currents and an
increased risk of short-circuiting in the control cabinet.
Complying with set temperature and humidity values within a
small tolerance range is a considerable challenge. Fan systems
or even heating and air-conditioning systems protect the
sensitive components in radio base stations.
Our reow-capable LSF-SMD (for SMD assembly) and LSF-SMT
(for the THR process) OMNIMATE PCB connection terminals
help to ensure constant and reliable fan control.
• Design freedom for your device due to various pitch sizes
(3.50, 5.00, 7.50 mm) and conductor outlet directions
(90°, 135°, 180°)
• High-quality soldering due to coplanarity of max. 100 μm
• Mechanical stability thanks to higher axial tensile forces per
pole than specied by IEC 60947-7-4
• Tested vibrations and shock resistance according to
IEC61373/10.2011 for long-term maintenance-free usage
Reduce your total cost of ownership with our PCB terminals for
fully automatic assembly processes.
5. Climate control
Efcient thanks to complete automation
Power supply
1.
Power distribution
2.
Monitoring
3.
Climate control
5.
Transmitting and receiving unit
4.