Brochure/Catalogue
1.
Power supply
2.
External I/Os and light connection
You need safe and durable device connections for the current
and voltage requirements in all LED applications. Terminals and
plug-in connectors from the OMNIMATE Signal series provide
maximum safety and numerous features. For example, you can
depend on the connector face or optional coding elements to
prevent the wrong parts being connected together. The plug-in
connectors can be made even more secure, using clips, locks or
screws. Depending on your application, you can choose between
spring (PUSH IN) or screw connections. For local error-free wir-
ing, you can have all OMNIMATE Signal products printed with
your own connection designations. The connection voltage is
between 10 and 48 V DC or up to 240 V AC, depending on
what you need for your application. And so that you can be sure
of reliable, secure, fastening, we offer plug connections with an
additional screw ange or lock and release lever.
For SMD assembled printed circuit boards is the connection
system also available as an SMD version or THR version. The
BLZP and BLF OMNIMATE Signal plug-in connectors, in size
5.08 mm with screw or PUSH IN connection, offer a fast and
rm plugin connection for the alternating voltage input. The LSF
PCB terminals in sizes 3.50 mm to 7.62 mm are a non-pluggable
connection solution. They can be used in either the wave solder
process do not make any changes to this sentence, it sounds ne
as is. Items PS 3.5, LM 3.5, LM 5.00, LM 5.08 and LS 5.08 can
be used for a screw-wire connection.
You can gain optimum efciency for your LED modules,
strips and lights by avoiding any shade from neighbouring
components. The heat produced by the lights also has to
be managed. If you often use aluminium composite PCBs,
your choice of suitable connection components is tough.
With high-power LED modules in particular, e.g. for use in
streetlights and outdoor lighting, very compact connection
components are needed.
The BCF 3.81 OMNIMATE plug-in connector variant with
a low height of just 7.9 mm is extremely at, yet can connect
conductors of up to 1.50 mm², including the wire-end ferrule.
Thanks to PUSH IN connection technology, the prepared
conductors can be connected in no time and can be trusted
to withstand vibrations. LSF-SMD SMD PCB terminals meet
the requirements for fully automatic surface mounting.
Equipped with PUSH IN connection technology, this genuine
SMD variant is a valuable addition to the existing range of
reowcapable LSF SMT PCB terminals with THR soldering
processes. Applications on glass, ceramic or aluminium com-
posite PCBs can now also be connected with the PUSH IN
connection system. The 3.50 mm size enables maximum
packing density with a maximum connection cross-section
of 1.50 mm². The OMNIMATE LSF series of PCB terminals
and 3.81 mm plugin connectors can be easily identied
through individual printing or colour push-buttons.
Your LED operating device needs input interfaces for light
sensors, dimmers, BUS systems (such as EIB, KNX, LON or
DALI) and output interfaces for connecting the LED modules.
The trend for these devices is moving towards them being
even more compact, which means that they need to be
suitable for a whole variety and number of installation cir-
cumstances. Installation of smaller and smaller LED lights,
in particular, is placing tougher demands on the size
and operability of the connection system used. Shorter
installation times and signicantly reducing the likelihood
of errors will obviously deliver optimized connections for
your operating devices.
The OMNIMATE LSF series of PCB terminals and plug-in
connectors in size 3.81 mm are perfectly suited for simple
and safe operation in tight installation situations. They pro-
vide a large clamping range of 0.20 to 1.50 mm² and a very
high current-carrying capacity of up to 17.5 A. Fast and safe
contacts are made using the proven PUSH IN connection
technology, which enables a direct connection without the
use of any tools. The conductors are loosened quickly and
easily with a built-in push-button.
3.
LED connection
PCB terminals and connectors, in 5.08 pitch, with PUSH IN or screw wire connections PCB terminals for fully automatic assembly using reow soldering (SMT),
with PUSH IN wire connections
Connectors, in 3.81 pitch, with PUSH IN or screw wire connections
1. Power supply
OMNIMATE Signal connector
BL 3.5, BCZ 3.81, BCF 3.81
BLZP 5.08, BLF 5.08
OMNIMATE Signal PCB terminals
LSF-SMT 3.5 (3.81), (5.08) LM 3.5, LM 5.08,
PS 3.5
2. External I/Os and light connection
OMNIMATE Signal connector
BL 3.5, BCZ 3.81, BCF 3.81
BLZP 5.08, BLF 5.08
OMNIMATE Signal PCB terminals
LSF-SMT 3.5 (3.81), (5.08) LM 3.5, LM 5.08,
LSF-SMD 3.5, PS 3.5
3. LED connection
OMNIMATE Signal connector
BL 3.5, BCZ 3.81, BCF 3.81,
BLZP 5.08, BLF 5.08
OMNIMATE Signal PCB terminals
LSF-SMT 3.5 (3.81), (5.08) LM 3.5, LM 5.08,
LSF-SMD 3.5, PS 3.5
Looking for more detailed
information?
Enter one of the search terms below into our online
catalogue, at http://catalog.weidmueller.com
1.
Power supply
2.
External I/Os and light
connection
3.
LED connection
App-Broschuere LED-Beleuchtung (EN).indd 5-8 13.03.13 15:44