Owner's Manual

27
54. Wrap the Low Cable (80) over a Small Pulley
(74). Attach the Small Pulley and two Half Pulley
G
uards (91) to the Double “U”-bracket (98) with
an M10 x 45mm Button Bolt (131) and an M10
N
ylon Locknut (116). M
ake sure that the Half
Pulley Guards are oriented as shown.
54
55.
Route the Low Cable (80) through the Weight
Carriage Base (20) as shown. Attach two Small
Pulleys (74) inside the Weight Carriage Base with
two M10 x 65mm Button Bolts (66), four M10
Washers (83), four 12.5mm Spacers (138), and
two M10 Nylon Locknuts (116).
55
56.
W
rap the Low Cable (80) over a Small Pulley
(74). Attach the Small Pulley, a Small Cable T
rap
(93), and two Half Pulley Guards (91) at the low-
est holes in the two Pulley Plates (92) with an
M10 x 52mm Button Bolt (135) and an M10 Nylon
Locknut (116).
Make sure that the Small Cable
Trap and the Half Pulley Guards are oriented
as shown.
20
66
66
83
83
83
80
131
80
74
135
80
93
91
92
138
138
138
138
91
98
56
91
74
74
91
1
16
116
116 74
116