Owner's Manual

19
34. Attach a Barbell Collar (101) to one end of the
Barbell (113) with an M6 x 8mm Set Screw (99).
Make sure that the Set Screw is inside the
indicated hole in the Barbell; stop turning the
Set Screw as soon as the end of the Set
Screw is flush with the Barbell Collar.
Next, attach a Barbell Adapter (102) to the Barbell
(113) with an M8 x 10mm Set Screw (49).
Then, attach the Barbell (113) to the Left Barbell
Carriage (110) with an M8 x 15mm Button Screw
(112).
Repeat this step with the other end of the
Barbell (113).
102
49
99
101
34
33. Orient the Locking Bar (114) as shown. Have a
second person hold the Locking Bar between the
Left Barbell Carriage (110) and the Right Barbell
Carriage (not shown). Insert the Barbell (113) into
the Left Barbell Carriage, the Locking Bar, and
the Right Barbell Carriage. Then, center the
Barbell.
Engage the hooks on the Locking Bar (114) into
slots in the Front Uprights (11).
114
113
33
110
11
Hook
3
2. Insert a Phillips screwdriver into the indicated
hole in a Trunnion (70), and tighten the Trunnion
into the Top Frame (17). Next, press a Top Frame
Cap (16) onto the Top Frame.
Attach the other Trunnion (70) and the other
Top Frame Cap (16) in the same way.
32
17
70
16
7
0
16
Hole
113
1
12
1
10
Hole