M0103070 Packing List QTY.
Read the operating instructions before you use the machine! Beware of thrown or flying objects to bystanders. General hazard safety alert Keep bystanders away from the machine. Read Operator's manual Keep third parties away from the danger zone! When you are reading the instructions for use, Please unfold the front and back pages.
SAFETY REGULATIONS I. General Operation lBefore starting to use this machine, read, under stand and follow all instructions that are provided in this manual. Be thoroughly familiar with the controls and the proper use of the machine before starting operations. WARNING:Do not put your hands or feet near or under rotating parts. Keep clear of the discharge opening at all times. lThis machine may only be operated by responsible persons, who are familiar with the operating in structions.
RZ PRODUCT SPECIFICATIONS MODEL SD RZ (WB537SLC V-3IN1) (WB537SCV-3IN1-SD) SD-PRO (WB537SCV ALBBC-SD) 21in/530mm 21in/530mm 21in/530mm Motor WEIBANG 196cc WEIBANG 196cc WEIBANG 196cc Moving type Self-propelled Self-propelled Self-propelled Cutting Width Cutting Height (mm) 1-4 in 1-4 in 1-4 in Cutting height adjustment 8 8 7 Drive speed Variable speed 3 gears 3 gears 18.5gal/70L 18.5gal/70L 18.5gal/70L Blade speed Max.
ENGAGE THE BLADE-CLUTCH (See Fig.6) OPERATION only for machines with BBC 1. For safety, the blade-clutch-lever can not be engaged directly after releasing. Push the lever forward until it make a 'click' sound, and then you can engaged the clutch again. 2.Press the blade-clutch-lever close to the handlebar completely to engage blade. 3.Release the lever about 2'' away from the handlebar, until the lever make a 'click' sound. And then re-press the lever and hold it togather with the handlebar. 4.
REAR BAGGING Open rear door and remove mulcher plug. Store mulcher plug in a safe place. You can now install the grass catcher. To convert to mulching or discharging operation, install mulcher plug into rear discharge opening of mower. Fig.10 CAUTION: During operation of emptying clippings from grass catcher, please wear protective gloves to prevent environmental influence on your skin. TO CONVERT MOWER Your lawn mower was shipped ready to be used as a mulcher.
heavy mulching, reduce your width of cut by overlapping previously cut path and mow slowly. Certain types of grass and grass conditions may require that an area be mulched a second time to completely hide the clippings. When doing a second cut, mow across or perpendicular to the first cut path. Change your cutting pattern from week to week. Mow north to south one week then change to east to west the next week. This will help prevent matting and graining of the lawn.
1.Remove hubcaps, bolt, spring lock washer and washer. 2.Remove wheels from wheel adjuster axles. 3.Remove any trash or grass cutting from inside the dust cover, pinion and/or drive wheel gear teeth. NOTE: The pinion gear, on both sides of the mower, are the same, however, they must be installed correctly. If installed incorrectly, the drive system will not work. 4.Place wheels back on adjuster axles. 5.Replace spring lock washer, washer, bolt and hub caps.
HANDLE You can fold your lawn mower handle for storage. 1.Loosen lever A on sides of the upper handle and pivot entire handle assembly forward and allow it to rest on mower. Re-tighten lever A. 2.When setting up your handle from the storage position, loosen lever A on both sides. and rotate handle and set it to new catch desired. Fig.15 Pivot forward Upper handle NOTE: Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage.
WEIBANG WARRANTY REGISTRATION WARRANTY Customer copy Proper maintenance of your Weibang equipment is the owner's responsibility. Follow the instructions in your owners guide for correct lubricants and maintenance schedule. Your Weibang dealer carries a complete line of quality lubricants and filters for your equipments engine, transmission, chassis and attachments.