Use wrench (N), bolt (R) to secure the side frame (22) to the side panel (2,3). Disassemble keyboard tray slider (T) by sliding the tray arm and tray bracket apart. Depress the small lever of the tray bracket and carefully pull the two pieces apart. Repeat this process for both keyboard tray sliders (T).
Secure screw (S) to the tray arm of keyboard tray slider (T) to the middle side panel (4,5). Secure screw (S) to the tray bracket of keyboard tray slider (T) to the drawer side panel (19,20).
Secure cam bolts (B) into top panel (1). Insert wooden dowels (A) into bottom panels (1,8,14). Secure cam bolts (B) into side panels (2, 3, 4, 5). Insert wooden dowels (A) into side panels (4,5).
Insert wooden dowels (A) into panels (9,12). Secure cam bolts (B) into panels (6, 7). Attach panel (6) to panel (4) using cam locks (C). Attach panel (7) to panel (5) using cam locks (C).
Attach side panels (4, 5) to shelf panel (9) using cam locks (C). Secure legs (11) to bottom panel (8) using screws (E).Tighten screws (E) with wrench (N).
Attach side panels (4,5) and back panel (12) to bottom panel (8) using screws (E). Tighten screws (E) with wrench (N). Attach top panel (1) to side panels (4,5) and back panel (12) using cam locks (C). Tighten cam locks (C) with a screwdriver.
Attach side panels (2,3) to assembled unit using cam locks(C).Tighten cam locks (C) with a screwdriver. Secure back panels (13) using screws (M).Tighten screws (M) with a screwdriver.
Secure cam bolts (B) into panel (17), Attach handles (H) to panel (17) using bolts (J). Tighten cam bolts (B) and bolts (J) with a screwdriver. Attach panels (19, 20) to panel (18) using screws (L). Attach support bar (14) to panel (18) using screw (L). Tighten screws (L) with a screwdriver. Carefully slide panel (21) into the thin grooves as shown in the diagram.
Attach panel (17) to drawer assembly using cam locks (D).Tighten cam locks (D) with a screwdriver. Secure support bar (14) to panel (17) using cam lock (C).Tighten cam locks (C) with a screwdriver.
Cover all cam locks using stickers (P). Carefully insert drawer assembly into assembled unit.
Insert shelf support pins (K) and carefully insert shelves (10). Attach hinge (F) to doors (15, 16) using screws (G). Attach handles (H) using bolts (J). Tighten screws (G) and bolts (J) with a screwdriver.
Attach doors (15, 16) to assembled unit using screws (G).Tighten screws (G) with a screwdriver. Completed stand assembly. The following steps show the assembly and attachment of the TV mount.
Attach lateral support bar (b) to upright support bar (a) using bolts (e) and washers (f). Attach support brackets (d) to upright support bar (a) using bolts (e) and washers (f). Slide mounting bars (c) onto lateral support bar (b). Secure mounting bars (c) by screwing adjustment knobs (g) into place.
Attach TV mount to stand assembly using bolts (e) and washers (f). Tighten bolts (e) with wrench (h).