SDS

Page 2 of 5
3 - Composition/Information on Ingredients
Ingredient
CAS #
Weight Percent
US Hazcom 2012/ GHS
Classification
LVP Aliphatic Hydrocarbon
64742-47-8
45-50%
Aspiration Toxicity Category 1
Petroleum Base Oil
64742-56-9
64742-65-0
64742-53-6
64742-54-7
64742-71-8
35%
Not Hazardous
Aliphatic Hydrocarbon
64742-47-8
<25%
Flammable Liquid Category 3
Aspiration Toxicity Category 1
Specific Target Organ Toxicity
Single Exposure Category 3
(nervous system effects)
Carbon Dioxide
124-38-9
2-3%
Simple Asphyxiant
Gas Under Pressure,
Compressed Gas
Note: The specific chemical identity and exact percentages are a trade secret.
4 – First Aid Measures
Ingestion (Swallowed): Aspiration Hazard. DO NOT induce vomiting. Call physician, poison control center or
the WD-40 Safety Hotline at 1-888-324-7596 immediately.
Eye Contact: Flush thoroughly with water. Remove contact lenses if present after the first 5 minutes and
continue flushing for several more minutes. Get medical attention if irritation persists.
Skin Contact: Wash with soap and water. If irritation develops and persists, get medical attention.
Inhalation (Breathing): If irritation is experienced, move to fresh air. Get medical attention if irritation or other
symptoms develop and persist.
Signs and Symptoms of Exposure: Harmful or fatal if swallowed. Aspiration of liquid into the lungs during
swallowing or vomiting may cause lung damage. May cause eye and respiratory irritation. Inhalation of mists
or vapors may cause drowsiness, dizziness and other nervous system effects. Skin contact may cause drying
of the skin.
Indication of Immediate Medical Attention/Special Treatment Needed: Immediate medical attention is
needed for ingestion.
5 – Fire Fighting Measures
Suitable (and unsuitable) Extinguishing Media: Use water fog, dry chemical, carbon dioxide or foam. Do
not use water jet or flooding amounts of water. Burning product will float on the surface and spread fire.
Specific Hazards Arising from the Chemical: Extremely flammable aerosol. Contents under pressure.
Keep away from ignition sources and open flames. Exposure of containers to extreme heat and flames can
cause them to rupture often with violent force. Vapors are heavier than air and may travel along surfaces to
remote ignition sources and flash back. Combustion will produce oxides of carbon and hydrocarbons.
Special Protective Equipment and Precautions for Fire-Fighters: Firefighters should always wear positive
pressure self-contained breathing apparatus and full protective clothing. Cool fire-exposed containers with
water. Use shielding to protect against bursting containers.
6 – Accidental Release Measures
Personal Precautions, Protective Equipment and Emergency Procedures: Wear appropriate protective
clothing (see Section 8). Eliminate all sources of ignition and ventilate area.
Methods and Materials for Containment/Cleanup: Leaking cans should be placed in a plastic bag or open
pail until the pressure has dissipated. Contain and collect liquid with an inert absorbent and place in a
container for disposal. Clean spill area thoroughly. Report spills to authorities as required.