Installation Instructions

ManualsBrandsWayne Water Systems ManualsPlumbingWayne 1/2 HP Cast Iron Portable Non-Submersible Utility Pump

Self-Priming* Portable Multi-Use Pump

www.waynepumps.com

Please read and save these instructions. Read carefully before attempting to assemble, install,

operate or maintain the product described. Protect yourself and others by observing all safety

information. Failure to comply with instructions could result in personal injury and/or property

damage! Retain instructions for future reference.

Operating Instructions and Parts Manual PC4

SPECIFICATIONS

POWER SUPPLY REQUIREMENTS 120 V, 60 Hz

MOTOR Brush Type

HORSEPOWER 1/2 HP

CIRCUIT REQUIREMENT 15 A (minimum)

LIQUID TEMPERATURE RANGE 40° F- 120° F

CONSTRUCTION

MOTOR HOUSING Cast Iron

MOTOR SHAFT Stainless Steel

IMPELLER Thermoplastic

VOLUTE Cast Iron

PUMP SUCTION 3/4 in. Brass Hose Fittings

PUMP DISCHARGE 3/4 in. Brass Hose Fittings

PERFORMANCE

Model HP

Discharge Head

10 ft. 20 ft. 40 ft. 60 ft. 80 ft.

PC4 1/2 Gal/hr 1600 1500 1240 950 660

Summary of content (8 pages)

PAGE 1
Self-Priming* Portable Multi-Use Pump Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
PAGE 2
Operating Instructions and Parts Manual PC4 DESCRIPTION GENERAL SAFETY INFORMATION This *self-priming portable Multi-Use pump is designed to be used as a transfer pump for such applications as emptying water heaters, livestock tanks, etc. The motor is air cooled; it is not designed to operate under water. This pump is not suitable for drinking water. CALIFORNIA PROPOSITION 65 NOTE: This pump is not intended for permanent installation or long, extended periods of continuous operation.
PAGE 3
Operating Instructions and Parts Manual GENERAL SAFETY INFORMATION (CONT’T) Do NOT walk on wet areas until ALL power is turned off. Failure to follow this warning WILL result in fatal electrical shock. Ne PAS marcher sur les zones humides jusqu'à ce que le courant est coupé. Le défaut de suivre cet avertissement entraînera une décharge électrique mortelle. 1. Read all instructions before operation. 2. Disconnect power and release all pressure within the system before servicing any component. 3.
PAGE 4
Operating Instructions and Parts Manual PC4 INSTALLATION (CONTINUED) MAINTENANCE Ordinary garden hose will collapse under suction pressure and should not be used for the inlet line. Let pump cool for at least 20 minutes before attempting to service. Motor MAY be extremely hot. Personal injury MAY result. 6. 7. Use a foot valve when pumping from a creek, pond, or source where foreign objects may be sucked into the pump. The foot valve should prevent solids from entering the inlet line.
PAGE 5
Operating Instructions and Parts Manual SERVICE PART REPLACEMENT ROTOR ASSEMBLY THRUST WASHER Instructional video available at www.waynepumps.com 1. Make sure the pump is unplugged and cooled down before disassembling the pump. 2. Release any pressure from the pump then disconnect any hoses or plumbing and drain the product. 3.
PAGE 6
Operating Instructions and Parts Manual PC4 For Replacement Parts or Customer Support, Call 1-800-237-0987 Please provide following information: Address any correspondence to: - Model number - Serial number (if any) - Part description and number as shown in parts list WAYNE Water Systems 101 Production Drive Harrison, OH 45030 U.S.A. 1 2 Ref. No. Description Part Number Qty.
PAGE 7
Operating Instructions and Parts Manual LIMITED WARRANTY For one year for PC4 model from the date of purchase, from an authorized dealer, Wayne Water Systems will repair or replace, at its option for the original purchaser, any part or parts of its Multi-Use Pumps or Water Pumps (“Product”) found upon examination by Wayne Water Systems to be defective in materials or workmanship. Please call Wayne Water Systems (800-237-0987) for warranty instructions.
PAGE 8
NOTES 8 www.waynepumps.