User's Manual
Table Of Contents
- Features and Benefits
- SPEEDLAN 9200 Mesh Protocol -- How It Works in Mesh Cells
- Document Changes/Corrections
- Contacting Technical Support
- Rooftop and Tower Installations Warning
- Regulatory Information
- Declaration of Conformity for RF Exposure
- General Safety Requirements for Installation of SPEEDLAN 9200 Models
- Hardware Overview
- Drawings of Outdoor, Remote-Mounted Components
- The SPEEDLAN 9202/SPEEDLAN 9203 with External Antenna
- Manual Initial Configuration of the SPEEDLAN 9200
- Overview of the SPEEDLAN 9200 Configurator General Main Menu
- Logging on the SPEEDLAN 9200 Configurator
- Helpful Information to Know...
- The Configuration Menu
- Network Menu
- System Menu
- Routing Menu
- Configuring the Radio Parameters
- DHCP Server Menu
- Setting Up DHCP and DHCP Relay
- Forwarding Menu
- Three Features of NAT
- Firewall
- IP Sessions
- Diagnostics Menu (Troubleshooting the Network)
- Admin Menu
- Network Menu
- Wireless menu
- Admin Menu
- Basics of IP Addressing
- Basics of Routing
- Glossary for Standard Data Communications
- Glossary for Standard Data Communications
- Appendices (A-F)
- Changing the Router's Topology Mode
- SPEEDLAN 9200 Configurator Passwords
- Manufacturer Information
- Radio Approvals
- SPEEDLAN 9200 Technical Specifications
- List of Acronyms
- Channels for IEEE 5GHz OFDM (UNII upper band)
- 2.4GHz DSSS Channels 2.4GHz OFDM Channels
- Software License Agreement
Part # 34357-MNL Rev.03 SPEEDLAN 9200 User Guide
3-54
Note: You can also choose to allow or deny such services between networks or
individual nodes in the firewall section. For more information, see Firewall, page 3-63.
To use the Services feature, choose Services from the Forwarding menu. The
following page will appear:
Figure 3-39: Services page
To enter a service, do the following:
1 To display a service in the Service text box, you must click the Choose
button to select a service (circled in red in the previous figure). The service
describes the specific sessions between client and server nodes on your
network (e.g., web servers, FTP servers and email servers).
2 The following pop-up will appear, which lists the known services.
Figure 3-40: Choose Service
3 Select one of the following:
• Common Services: This list contains the most common type of network
services. (Note: SPEEDView is also listed under this list. It simply lets the
user allow SPEEDView access when the firewall is enabled.) Select the
appropriate service from this drop-down list. Then, click the Add Service
button on the Services page.