Instruction Manual

Watlow Series PD ■ 89 ■ Chapter 9 Device Config Table
Device Configuration > Control Loops > Loop 2 > PID Set 5
Loop 2 - PID Set 5, Indirect Prop BandPID Set 5 - Set the heat (indirect) proportional band from set point in process units.,Configuration
Multiple PID Sets 2,,1000 to 999000,25000,863-864 (R/W) (/1000)
Loop 2 - PID Set 5, Indirect IntegralPID Set 5 - Set the heat (indirect) integral in minutes per repeat.,Configuration Multiple PID Sets 2,,0
to 99990,0,865-866 (R/W) (/1000)
Loop 2 - PID Set 5, Indirect DerivativePID Set 5 - Set the heat (indirect) derivative time in minutes.,Configuration Multiple PID Sets 2,,0 to
9990,0,867-868 (R/W) (/1000)
Loop 2 - PID Set 5, Indirect DeadbandPID Set 5 - Set the offset of the heat (indirect) proportional band from set point in process units.,Con-
figuration Multiple PID Sets 2,,0 to 999000,0,861-862 (R/W) (/1000)
Loop 2 - PID Set 5, Direct Prop BandPID Set 5 - Set the cool (direct) proportional band from set point in process units.,Configuration Multi-
ple PID Sets 2,,1000 to 999000,25000,871-872 (R/W) (/1000)
Loop 2 - PID Set 5, Direct IntegralPID Set 5 - Set the cool (direct) integral in minutes per repeat.,Configuration Multiple PID Sets 2,,0 to
99990,0,873-874 (R/W) (/1000)
Loop 2 - PID Set 5, Direct DerivativePID Set 5 - Set the cool (direct) derivative time in minutes.,Configuration Multiple PID Sets 2,,0 to
9990,0,875-876 (R/W) (/1000)
Loop 2 - PID Set 5, Direct DeadbandPID Set 5 - Set the offset of the cool (direct) proportional band from set point in process units.,Configu-
ration Multiple PID Sets 2,,0 to 999000,0,869-870 (R/W) (/1000)
Parameter Name
and Description
Web Page Your
Settings
Range Default Modbus*
(Read/write and
scaling)
Loop 2 - PID Set 5 Indirect
Prop Band
Set the heat (indirect) propor-
tional band from set point in
process units.
Configuration Multiple
PID Sets 2
1000 to 999000 degrees or
units
25000 863-864 (R/W)
(/1000)
Loop 2 - PID Set 5 Indirect
Integral
Set the heat (indirect) integral
in minutes per repeat.
Configuration Multiple
PID Sets 2
0 to 99990 minutes 0 865-866 (R/W)
(/1000)
Loop 2 - PID Set 5 Indirect
Derivative
Set the heat (indirect) deriva-
tive time in minutes.
Configuration Multiple
PID Sets 2
0 to 9990 minutes 0 867-868 (R/W)
(/1000)
Loop 2 - PID Set 5 Indirect
Dead Band
Set the offset of the heat (indi-
rect) proportional band from
set point in process units.
Configuration Multiple
PID Sets 2
0 to 999000 degrees or units 0 861-862 (R/W)
(/1000)
Loop 2 - PID Set 5 Direct
Prop Band
Set the cool (direct) propor-
tional band from set point in
process units.
Configuration Multiple
PID Sets 2
1000 to 999000 degrees or
units
25000 871-872 (R/W)
(/1000)
Loop 2 - PID Set 5 Direct
Integral
Set the cool (direct) integral in
minutes per repeat.
Configuration Multiple
PID Sets 2
0 to 99990 minutes 0 873-874 (R/W)
(/1000)
Loop 2 - PID Set 5 Direct
Derivative
Set the cool (direct) derivative
time in minutes.
Configuration Multiple
PID Sets 2
0 to 9990 minutes 0 875-876 (R/W)
(/1000)
Loop 2 - PID Set 5 Direct
Dead Band
Set the offset of the cool
(direct) proportional band
from set point in process
units.
Configuration Multiple
PID Sets 2
0 to 999000 degrees or units 0 869-870 (R/W)
(/1000)