Instruction Manual

Watlow Series PD ■ 119 ■ Chapter 9 Device Config Table
Parameter Name
and Description
Web Page Your
Settings
Range Default Modbus*
(Read/write and
scaling)
Datalog - Log Active Process Value 1Specify to include Analog Input 1 Active Process in datalog.,Configuration Datalogging Settings,,No
(0)Yes (1),No (0),1191 (R/W)
Datalog - Log Active Process Value 2Specify to include Analog Input 2 Active Process in datalog.,Configuration Datalogging Settings,,No
(0)Yes (1),No (0),1192 (R/W)
Datalog - Log Active Process Value 3Specify to include Analog Input 3 Active Process in datalog.,Configuration Datalogging Settings,,No
(0)Yes (1),No (0),1193 (R/W)
Datalog - Log Active Process Value 4Specify to include Analog Input 4 Active Process in datalog.,Configuration Datalogging Settings,,No
(0)Yes (1),No (0),1194 (R/W)
Datalog - Log Working Set point 1Specify to include Loop 1 Working Set point in datalog.,Configuration Datalogging Settings,,No (0)Yes
(1),No (0),1195 (R/W)
Datalog - Log Working Set point 2Specify to include Loop 2 Working Set point in datalog.,Configuration Datalogging Settings,,No (0)Yes
(1),No (0),1196 (R/W)
Datalog - Log Loop Power 1Specify to include Loop 1 Power output in datalog.,Configuration Datalogging Settings,,No (0)Yes (1),No
(0),1199 (R/W)
Datalog - Log Loop Power 2Specify to include Loop 2 Power output in datalog.,Configuration Datalogging Settings,,No (0)Yes (1),No
(0),1200 (R/W)
Datalog - Log Alarm 1 StatusSpecify to include Alarm 1 Status in datalog.,Configuration Datalogging Settings,,No (0)Yes (1),No (0),1201
(R/W)
Datalog - Log Alarm 2 StatusSpecify to include Alarm 2 Status in datalog.,Configuration Datalogging Settings,,No (0)Yes (1),No (0),1202
(R/W)
Datalog - Log Active Process
Value 1
Specify to include Analog In-
put 1 Active Process in data-
log.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1191 (R/W)
Datalog - Log Active Process
Value 2
Specify to include Analog In-
put 2 Active Process in data-
log.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1192 (R/W)
Datalog - Log Active Process
Value 3
Specify to include Analog In-
put 3 Active Process in data-
log.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1193 (R/W)
Datalog - Log Active Process
Value 4
Specify to include Analog In-
put 4 Active Process in data-
log.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1194 (R/W)
Datalog - Log Working Set
Point 1
Specify to include Loop 1
Working Set Point in datalog.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1195 (R/W)
Datalog - Log Working Set
Point 2
Specify to include Loop 2
Working Set Point in datalog.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1196 (R/W)
Datalog - Log Loop Power 1
Specify to include Loop 1 Power
output in datalog.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1199 (R/W)
Datalog - Log Loop Power 2
Specify to include Loop 2 Power
output in datalog.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1200 (R/W)
Datalog - Log Alarm 1 Status
Specify to include Alarm 1
Status in datalog.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1201 (R/W)
Datalog - Log Alarm 2 Status
Specify to include Alarm 2
Status in datalog.
Configuration Data-
logging Settings
No (0)
Yes (1)
No (0) 1202 (R/W)