Dimensions Guide

INSTALLATION: Add 1/2" to 1" height of tub at point I to allow space for bedding compound. All Watertech Whirlpool Baths require
mortar to be placed under tub for tub bedding. Please measure tub before building tub cabinet. Drawing shows standard pump location
for this tub. Custom pump locations available - please call Watertech Whirlpool Baths for details. Measurements are plus or minus 1/2",
and are subject to change without notice. Filling this tub to the maximum may require an above average size or dedicated water heater.
This data sheet supersedes all specifications published prior to this publication date.
64
1
/
4
"
A
18
1
/
2
"
D
6464
19"
I
ALL SPECIFICATIONS VALID AS OF 12/12/2009
AND SUPERSEDES ALL PREVIOUS PUBLISHED DATA
BASE RAILS
L=64 1/4" W= 64 1/4"
18
3
/
4
OVERFLOW
H
A
C
B
D
E
F
G
H
I
Overflow to bottom of base rail
Bottom of tub lip to bottom of base rail
J
Top of tub deck to bottom of base rail
Total length of tub
Inside width of tub at top
Inside width of tub at floor
Inside width of tub floor at seating area
Edge of tub to center of drain
Center of drain to center of overflow
Top of deck to tub floor at deepest point
PUMP
LOCATION
SUCTION
19
1
/
2
"
G
54"
E
28
1
/
4
"
28
1
/
4
"
A
11"
F
OVERFLOW
20
1/
2
"
J
B
46
1
/
2
"
C
F
10
1
/
8
"
OVERFLOW