Installation guide

WATERS NETWORK SYSTEMS™ ProSwitch

- 2600M, User’s Manual, 02/07 Page 34

6.6 MAC Security Configuration

This function is used to set the security modes for the static MAC address on the port.

There are three options for this function:

 No Security - No MAC address access limitation for the port, i.e. every MAC address

could access the network through the port.

 Accept function - The port can accept the static MAC addresses only, i.e. only a user

with a static MAC address can access the network through the port.

 Reject function: Only the static address will be rejected by the port, i.e. other MAC

addresses (except static MAC addresses) can access the network through the port.

Figure 6.8 – MAC Security Configuration