Installation Guide

MODEL: F5-0011

1) Position the faucet and o-ring on the installation surface.

2) Adjust the position of the faucet and secure it with the mounting kit as pictured.

3) Connect the flex hoses to the shut off valves (not included) and copper tubes, tighten with adjustable wrench. Do not overtighten.

Caution: Make sure to connect the hot and cold flex hoses to hot and cold shut off valves correctly.

PAGE 1
MODEL: F5-0011 1) Position the faucet and o-ring on the installation surface. 2) Adjust the position of the faucet and secure it with the mounting kit as pictured. 3) Connect the flex hoses to the shut off valves (not included) and copper tubes, tighten with adjustable wrench. Do not overtighten. Caution: Make sure to connect the hot and cold flex hoses to hot and cold shut off valves correctly.
PAGE 2
MODEL: F5-0011 1) Remove sprayer by hand. Turn on both hot and cold water and to flush water lines for one minute. Reinstall sprayer by hand. 2) Check all conntections at arrows for leaks, re-tigthen if necessary. Do not overtigthen.