Instructions / Assembly

Making Electrical Provision for the Heater
3
Before You Begin
Thank you for purchasing the Warmup Foil heating mats.
This manual contains IMPORTANT information regarding the safe use and installation of your heating
mats. Please read through the entire manual carefully before you install or use the product.
Introduction
Product Specification and details
Warmup Foil Floor Heating Mat: - for laminate and Carpet floors
The Warmup Foil is ultra thin electric radiant floor heating system primarily for use under laminate,
engineered wood and carpet.
CONSTRUCTION:
The Warmup Foil system is constructed using dual core fluoropolymer insulated heating cables covered
by a metallic braid, the heating cables are sandwiched between two layers of specially reinforced
aluminium foil.
The aluminium foil along with the uniform spacing of the heating elements ensures even heat
distribution. The heating elements are connected to the power supply cable, which exits the mat from
one corner. The power lead is a flat thin two core flexible cord, consisting of two insulated conductors
covered by a metallic ground braid and an outer sheath.
Warmup Foil heating mats are available at a nominal heat output of 12 W/ sqft at 120 V & 240 V.
The mats are available in predetermined lengths with a 10ft cold tail . The Warmup Foil mats are
manufactured & tested in a carefully controlled factory environment.
Warmup Foil heating mats are intended to be installed between the underlayment and the laminate
/carpet floor. Refer to important notes section in this manual in regard to compatible materials.
Warmup Foil heating mats are for indoor applications only. Although they are completely watertight
and grounded, all installation and wiring instructions MUST be followed. The FOIL heating mats are
NOT suitable for under tile, stone, or nailed/glued hardwoods.