Instructions / Assembly

In order to fit your heating mat into a specific area, it may be necessary to cut and turn the mat

(examples below).

NEVER cut the heating cable. When cutting and flipping NADWM be careful not to cut or dam-

age the heating cable. Never allow strips of mesh to overlap. If you remove the wire from the

mesh for a custom layout, maintain a min. 2”, max. 4” spacing between the heating cable.

Heater Layout Example

Please take a moment to double-check that your plan has the proper room dimensions and

that you have the correct size and proper number of heating mats. Once the mat has been cut

it cannot be returned. Mats should run backwards and forwards between walls and obstructions

as shown in the examples.

Modifying the Mats

Note: When laying

two or more heat-

ers, ensure that

the unheated leads

reach the thermo-

stat.