Instructions & Operation Manual for WarmlyYours Mirror Defoggers
Congratulations on the purchase of your Mirror Defogger. This system can be easily installed behind any mirror to keep it steam free and crystal clear whenever you use the bathroom. Simply turn on the lights and the Mirror Defogger will provide a clear, steam free section of mirror for you to begin your day. SAFETY INFORMATION • All wiring must be in accordance with the National Electrical Code (NEC) and should be performed by a licensed professional who is certified to do electrical wiring.
INSTALLATION INSTRUCTIONS This appliance must be installed in accordance with the instructions in this manual and the NEC guidelines relating to bathroom electrical fixtures. The Mirror Defogger must be on a GFCI protected circuit and wired by a professional certified to do electrical wiring. Determine Location of Mirror Defogger Step 1 Choose a location for your Mirror Defogger so that everyone in your home can enjoy it.
INSTALLATION INSTRUCTIONS Step 2 - Cont. Location where the lead wire leaves the Mirror Defoggers. 6” 12” 5.75” 12” 9” 25.
INSTALLATION INSTRUCTIONS Step 2 - Cont. Location where the lead wire leaves the Mirror Defoggers. 14.75” 19.5” 12.5” 10” 12.5” 10” 6” 5.5” FFM-20R FFM-25R 5.75” 5.5” 7.5” 6” 7.5” 6” 12” 9.
Prepare Electrical Rough-In and Wiring Step 3 Using the location you determined in Step 2, install a 2” x 3” remodeler’s electrical junction box inline with the Mirror Defogger’s lead wires. Refer to Diagram C. Note: The location where the wires leave must be entirely within the box to light junction area of the new electrical junction box. leads from Mirror Defogger Step 4 Run Romex cable from a nearby junction box to the new box.
MSRP $65.00 $85.00 105.00 $65.00 $85.00 105.00 $85.00 105.00 Attach Mirror Defogger to the back of the Mirror Step 5 lace the element on the mirror so that it will line up with the P markings on the wall. Step 6 to light junction box leads from Mirror Defogger ry fit the Mirror Defogger on the mirror, and line up the lead wires D with electrical box. Do not remove paper backing yet. Draw an outline of the Mirror Defogger on the mirror.
Electrical Wiring Step 8 - continued Diagram E to light junction box leads from Mirror Defogger Step 9 Push the excess wire into the junction box. Step 10 Wall Wire the Romex cable to the junction box that houses the electrical wiring for the existing lighting. ClearlyYou™ Defogger Existing electrical box for vanity lighting Install Mirror New single gang electrical box Mirror Step 11 Install mirror in line with the mirror manufacturer’s instructions.
Installing Mirror (cont.) CAUTION: Electric heated mirror may crack under the following conditions: Marble or ceramic tile 1. If there is no gap between the mirror and hard substances. If there is tile or marble around the perimeter of the heated mirror, the mirror may crack during heating because there is not enough room to allow for the expansion of the mirror. A 2mm gap around the perimeter of the mirror is required to allow for this expansion. Fogless mirror Marble or ceramic tile 2.
Safety Ratings The Mirror Defogger is UL listed under standard 499. The main electrical line feeding the Mirror Defogger must incorporate a GFCI for North America. For the file number, please contact WarmlyYours.
WarmlyYours Warranty Information WarmlyYours.com Inc. warrants the WarmlyYours Mirror Defogger (“the Product”) to be free from defects in materials and workmanship for 1 year from the date of sale, provided that the Product is installed in accordance with the accompanying Instructions and Operation Manual, any special written design or installation guidelines provided by WarmlyYours.com Inc., the National Electrical Code (NEC), and all applicable local building and electrical codes.
