MTS2150 MTS2180
11
Ax8 Bx8 Cx16 Dx28 Ex8 Fx8 Gx1 Hx4 Ix14 Jx4 Kx2 Lx2 Mx2
√ × Screw part(F) in half,not all. Attach panels(1,2) to legs(3)) using screws(F ).
Step 1 Step 2 D 8 K Screw parts(K1)into panel(8),then cover (K1) with K2.
8 A B C 1 5 A x8 6 2 Screw part(A) into panel(8),then attach panels(1,2,5,6) to panels(8) B 8 C 8
7 2 Slide part(7) into designated area.
M L 4 1 5 6 2 √ × Tighten the screws on the legs. Insert dowels(C) into panels(1,2,5,6), then attach panels(4) to panels(1,2,5,6) using screws(E); Screw parts(M) into legs(L),then ttach legs(L) to panel(4).
1 8 7 4 2 I Screw parts(I)into panels(1,2,4,8).
5 Attach panel(9) to panels(5,6) using screws(H ).
10 and 11 Attach parts(J) to panels(10,11) using screws(D ).
2 11 1 Attach panels(10,11) to panels(1,2) using screws(D ).
Tip: If you find that the door does not connect smoothly, you can adjust part D and K to achieve a perfect connection.
Final Assembly