Insert the Wooden Dowel (A) to the Bottom Panel (2) and Side Panel (4)(5). Insert the Cam Bolt (B) to the Bottom Panel (2) for both sides. Assemble the Beam (8,10) to the support Front Panel (6,7,9) by using Screw (J).
Insert the Cam Bolt (B) to the Top Panel (1), Insert the Wooden Dowel (A) to the Front Panel (9,11,12) Insert the Wooden Dowel (A), Cam Bolt (B) to the Wooden Legs (15,16,17,18) Insert the Wooden Dowel (A) to the Side Panel (3)
Use Cam Lock (C) to assemble the Wooden Legs (15,17) to the Side Panel (3) Repeat Step #5 for Wooden Legs (16,18)
Upside Down the Bottom Panel (2) and assemble the Front Panel (12) with Screw (H) Use Cam Lock (C) to assemble the Front Panel (11) to the Bottom Panel (2)
Use Cam Lock (C) to assemble the Support Panel (13) to the Bottom Panel (2) Use Cam Lock (C) to assemble the Front Panel (6,7) to the Side Panel (4,5)
Assemble the Side Panel (4,5) to the Bottom Panel (2) and secure it by Bolt (D) and Wrench (L) Insert the Front Panel (9) to the Front Panel (6,7)
Assemble the Wooden Leg (15,17) to the Front & Bottom Panel (2,9) and secure it with Cam Lock (C) Repeat Step #13 for Wooden Leg (16,18)
Right Up the Stand and slot in the Back Panel (19) to the Side Panels Place the Top Panel (1) to the Stand and Secure it with the Cam Locks (C)
Use Flat-Head Screw (F) and Plastic Wedge (J) to secure the Back Panel (19) Attached the Sticker (N) to cover the Cam Lock (C)
Input the Shelf Support Pin (G) to the Stand and place the Wooden Shelf (20) on top Assemble the Fireplace Insert (P) to the Stand and secure it with Screw (K)
For security, use Cam Lock (C) to assemble the Support Panel (14) to the Bottom Panel (2)
