Item # : AFVET2DRET Assembly Instructions TM Walker Edison ® Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 18/09/2020 (I) Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The three main types of hardware used to assemble this product are: wood dowels, screws and bolts. V. The provided glue is to secure wood dowels in place.
Parts List 1 2 3 4 4 6 5 Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Hardware List A M6x35mm Bolt 8 pcs B M6x20mm Bolt 4 pcs Flat washer 4 pcs C D Ø4x30mm Screw 4 pcs E M4 Hex key 1 pc F Ø4x45mm Screw 2 pcs Nut 2 pcs G Philips head screwdriver required for assembly (not included) The hardware quantities listed above are required for proper assembly. Some extra hardware may also have been included. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 1 4 4 2 A 3 A A 5 E A Using bolt (A) attach part (5) to parts (2,3,4) with Hex key (E) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 2 4 2 4 A E 3 A A 6 A Using bolt (A) attach part (6) to parts (2,3,4) with Hex key (E) as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 3 6 D 5 2 D D D E 3 1 B C Using bolt (B) attach flat washer (C) into parts (5,6) to part (1) with Hex key (E) , then using bolt (D) attach parts (2,3) to part (1) with Philips head screwdriver as per diagram. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
Step 4 If you need to remove the drawer, please pull the drawer forward with one hand, and press up the plastic stopper with another hand ,then you can take drawer out easily as per diagram. Don’t be too fast to avoid getting caught. Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
1 Step 5 2 3 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. Wall F G F F 2 G Wall G Using screw (F) insert part (2) to Nut (G) wall with Philips head screwdriver as per diagram.
Step 6 Final Assembly Copyright © 2020 by Walker Edison Furniture Co., LLC. All rights reserved. P.
