Item # : BR3DSLDR Assembly Instructions Revised 10/2018 2018 P.
VIII. Maintenance Guide To maintain long term performance and easy gliding of your solid wood drawers, we recommend applying wax to the wooden guide rails. 1.Bee's wax is recommended or Paraffin wax from a standard candle can be used. 2.Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood contact when opening and closing the drawer. (Wax should be room temperature, do not melt the wax onto the wood) 3.
1 7 14 7 12 9 9 13 20 2 11 9 3 15 9 9 17 18 9 4 16 5 8 19 6 13 10 8 2x 5 8 6 8 Part# Description Qty Part# Description Qty 1 Top panel 01 11 Left drawer side 01 2 Right side panel 01 12 Right drawer side 01 3 Left side panel 01 13 Drawer bottom 03 4 Bottom panel 01 14 Drawer back 01 5 Right crossbeam foot 02 15 Small drawer front 01 6 Left crossbeam foot 02 16 Large left drawer side 02 7 Bottom panel 02 17 Large right drawer side 02 8 Fo
A Ø8*30mm Wooden dowel 42 pcs B Ø8*20mm Wooden dowel 24 pcs C Ø3,5*25mm Screw 12 pcs D Ø3,5*30mm Screw 38 pcs E Ø4,0*40mm Screw 16 pcs F Ø10*10 Nail 18 pcs G Ø7*80mm Screw 04 pcs Hex Key 01 pcs Glue 01 pcs “H” Profile 01 pc K Wall anchor 01 pc L Washer 02 pc M Ø6mm 01 pc H 4mm I J 714mm Tape measure and hammer recommended for assembly (not included) P.
Step 1 A A A A 3 A A A 2 A A A A A A A A A 2x 20 A A 5 6 2x A A A A 12 A A 11 A 19 A B A A B A Ø8*30mm B Ø8*20mm I 17 9 Please assemble on a clean soft surface to avoid damage. 6x 2x 16 2x A A A Insert wood dowel (A) and glue (I) into parts (2, 3, 5, 6, 11, 12, 16, 17, 19). Insert wood dowel (B) and glue (I) into part (9).
Step 3 D 3 D 20 D 2 Secure front cross beam (20) to panels (2,3) using screw (D) D Ø3,5*30mm 02 Step 4 E E 4 E E E Attach bottom panel(4) to body using screw (E) E Ø4,0*40mm E 06 Step 5 D 8 D 2x 5 D 6 Use screw (D) to attach part (5) to part (8) and attach part (6) to part (8), do this step twice D Ø3,5*30mm 2x 8 04 P.
Step 6 G H G+H G+H E 6 E E 19 E E E E 5 E E Ø4,0*40mm G 10 04 Ø7*80mm H 01 4mm Use screw (E) to attach legs to body. Use screw (G) and hex key (H) to attach the feet to the body, from inside the unit. Attach crossbeam (19) to body using screw (E) Step 7 1 D D D D D Use screw (D) to attach part (1) to body D Ø3,5*30mm 06 P.
Step 8 F F F F F J F F 7 7 F 7 F F 7 F F F F F J F F F F Secure back panel (7) with part (J) to body with nails (F) Ø10*10 J 18 01 714mm Step 9 B B B B B B Insert wood dowel (B) into the front hole in the drawer rail (9). B FRONT B Ø8*20mm 06 P.
Step 11 14 D 12 D D DD D 13 11 D D 15 Attach parts (11,12) to part (15) , insert panel (13) into groves and secure part (14) with screws(D). D Ø3,5*30mm 08 Step 12 18 D 17 D 2x 16 D D D D 13 D D 10 2x Attach parts (16,17) to part (10) , insert panel (13) into groves and secure part (18) with screws(D). D Ø3,5*30mm 16 Step 13 B B B 15 10 Insert wood dowel (B) on the inside of all drawers while drawer is inside the unit. Dowel is used as drawer stop.
Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors. 1º 2º K M Top L L D D Wall Back panel Top Ø6mm = = D 02 Ø3,5*30mm K 01 L 02 M 01 P.